urn - Dave's Blog

If you're developing with the new Windows.Web.UI.Interop.WebViewControl you may have noticed you cannot navigate to localhost HTTP servers. This is because the WebViewControl's WebView process is a UWP process. All UWP processes by default cannot use the loopback adapter as a security precaution. For development purposes you can allow localhost access using the checknetisolation command line tool on the WebViewControl's package just as you can for any other UWP app. The command should be the following:

checknetisolation loopbackexempt -a -n=Microsoft.Win32WebViewHost_cw5n1h2txyewy

As a warning checknetisolation is not good on errors. If you attempt to add a package but get its package family name wrong, checknetisolation just says OK:

C:\Users\davris>checknetisolation LoopbackExempt -a -n=Microsoft.BingWeather_4.21.2492.0_x86__8wekyb3d8bbwe
OK.

And if you then list the result of the add with the bad name you'll see the following:

[1] -----------------------------------------------------------------
    Name: AppContainer NOT FOUND
    SID:  S-1-15-...

There's also a UI tool for modifying loopback exemption for packages available on GitHub and also one available with Fiddler.

As an additional note, I mentioned above you can try this for development. Do not do this in shipping products as this turns off the security protection for any consumer of the WebViewControl.

Win10 Changes

In Win8.1 JavaScript UWP apps we supported multiple windows using MSApp DOM APIs. In Win10 we use window.open and window and a new MSApp API getViewId and the previous MSApp APIs are gone:

	Win10	Win8.1
Create new window	window.open	MSApp.createNewView
New window object	window	MSAppView
viewId	MSApp.getViewId(window)	MSAppView.viewId

WinRT viewId

We use window.open and window for creating new windows, but then to interact with WinRT APIs we add the MSApp.getViewId API. It takes a window object as a parameter and returns a viewId number that can be used with the various Windows.UI.ViewManagement.ApplicationViewSwitcher APIs.

Delaying Visibility

Views in WinRT normally start hidden and the end developer uses something like TryShowAsStandaloneAsync to display the view once it is fully prepared. In the web world, window.open shows a window immediately and the end user can watch as content is loaded and rendered. To have your new windows act like views in WinRT and not display immediately we have added a window.open option. For example
let newWindow = window.open("https://example.com", null, "msHideView=yes");

Primary Window Differences

The primary window that is initially opened by the OS acts differently than the secondary windows that it opens:

	Primary	Secondary
window.open	Allowed	Disallowed
window.close	Close app	Close window
Navigation restrictions	ACUR only	No restrictions

The restriction on secondary windows such that they cannot open secondary windows could change in the future depending on feedback.

Same Origin Communication Restrictions

Lastly, there is a very difficult technical issue preventing us from properly supporting synchronous, same-origin, cross-window, script calls. That is, when you open a window that's same origin, script in one window is allowed to directly call functions in the other window and some of these calls will fail. postMessage calls work just fine and is the recommended way to do things if that's possible for you. Otherwise we continue to work on improving this.

The documentation for printing in JavaScript UWP apps is out of date as it all references MSApp.getHtmlPrintDocumentSource but that method has been replaced by MSApp.getHtmlPrintDocumentSourceAsync since WinPhone 8.1.

Background

Previous to WinPhone 8.1 the WebView's HTML content ran on the UI thread of the app. This is troublesome for rendering arbitrary web content since in the extreme case the JavaScript of some arbitrary web page might just sit in a loop and never return control to your app's UI. With WinPhone 8.1 we added off thread WebView in which the WebView runs HTML content on a separate UI thread.

Off thread WebView required changing our MSApp.getHtmlPrintDocumentSource API which could no longer synchronously produce an HtmlPrintDocumentSource. With WebViews running on their own threads it may take some time for them to generate their print content for the HtmlPrintDocumentSource and we don't want to hang the app's UI thread in the interim. So the MSApp.getHtmlPrintDocumentSource API was replaced with MSApp.getHtmlPrintDocumentSourceAsync which returns a promise the resolved value of which is the eventual HtmlPrintDocumentSource.

Sample

However, the usage of the API is otherwise unchanged. So in sample code you see referencing MSApp.getHtmlPrintDocumentSource the sample code is still reasonable but you need to call MSApp.getHtmlPrintDocumentSourceAsync instead and wait for the promise to complete. For example the PrintManager docs has an example implementing a PrintTaskRequested event handler in a JavaScript UWP app.

    function onPrintTaskRequested(printEvent) {    
        var printTask = printEvent.request.createPrintTask("Print Sample", function (args) {
            args.setSource(MSApp.getHtmlPrintDocumentSource(document));
    });

Instead we need to obtain a deferral in the event handler so we can asynchronously wait for getHtmlPrintDocumentSourceAsync to complete:

    function onPrintTaskRequested(printEvent) {    
        var printTask = printEvent.request.createPrintTask("Print Sample", function (args) {
            const deferral = args.getDeferral();
            MSApp.getHtmlPrintDocumentSourceAsync(document).then(htmlPrintDocumentSource => {
                args.setSource(htmlPrintDocumentSource);
                deferral.complete();
            }, error => {
                console.error("Error: " + error.message + " " + error.stack);
                deferral.complete();
            });
        });

The x-ms-webview HTML element has the void addWebAllowedObject(string name, any value) method and the webview XAML element has the void AddWebAllowedObject(String name, Object value) method. The object parameter is projected into the webview’s top-level HTML document’s script engine as a new property on the global object with property name set to the name parameter. It is not injected into the current document but rather it is projected during initialization of the next top-level HTML document to which the webview navigates.

Lifetime

If AddWebAllowedObject is called during a NavigationStarting event handler the object will be injected into the document resulting from the navigation corresponding to that event.

If AddWebAllowedObject is called outside of the NavigationStarting event handler it will apply to the navigation corresponding to the next explicit navigate method called on the webview or the navigation corresponding to the next NavigationStarting event handler that fires, whichever comes first.

To avoid this potential race, you should use AddWebAllowedObject in one of two ways: 1. During a NavigationStarting event handler, 2. Before calling a Navigate method and without returning to the main loop.

If called both before calling a navigate method and in the NavigationStarting event handler then the result is the aggregate of all those calls.

If called multiple times for the same document with the same name the last call wins and the previous are silently ignored.

If AddWebAllowedObject is called for a navigation and that navigation fails or redirects to a different URI, the AddWebAllowedObject call is silently ignored.

After successfully adding an object to a document, the object will no longer be projected once a navigation to a new document occurs.

WinRT access

If AddWebAllowedObject is called for a document with All WinRT access then projection will succeed and the object will be added.

If AddWebAllowedObject is called for a document which has a URI which has no declared WinRT access via ApplicationContentUriRules then Allow for web only WinRT access is given to that document.

If the document has Allow for web only WinRT access then projection will succeed only if the object’s runtimeclass has the Windows.Foundation.Metadata.AllowForWeb metadata attribute.

Object requirements

The object must implement the IAgileObject interface. Because the XAML and HTML webview elements run on ASTA view threads and the webview’s content’s JavaScript thread runs on another ASTA thread a developer should not create their non-agile runtimeclass on the view thread. To encourage end developers to do this correctly we require the object implements IAgileObject.

Property name

The name parameter must be a valid JavaScript property name, otherwise the call will fail silently. If the name is already a property name on the global object, that property is overwritten if the property is configurable. Non-configurable properties on the global object are not overwritten and the AddWebAllowedObject call fails silently. On success, the projected property is writable, configurable, and enumerable.

Errors

Some errors as described above fail silently. Other issues, such as lack of IAgileObject or lack of the AllowForWeb attribute result in an error in the JavaScript developer console.

JavaScript Microsoft Store apps have some details related to activation that are specific to JavaScript Store apps and that are poorly documented which I’ll describe here.

StartPage syntax

The StartPage attributes in the AppxManifest.xml (Package/Applications/Application/@StartPage, Package/Applications/Extensions/Extension/@StartPage) define the HTML page entry point for that kind of activation. That is, Application/@StartPage defines the entry point for tile activation, Extension[@Category="windows.protocol"]/@StartPage defines the entry point for URI handling activation, etc. There are two kinds of supported values in StartPage attributes: relative Windows file paths and absolute URIs. If the attribute doesn’t parse as an absolute URI then it is instead interpreted as relative Windows file path.

This implies a few things that I’ll declare explicitly here. Windows file paths, unlike URIs, don’t have a query or fragment, so if you are using a relative Windows file path for your StartPage attribute you cannot include anything like ‘?param=value’ at the end. Absolute URIs use percent-encoding for reserved characters like ‘%’ and ‘#’. If you have a ‘#’ in your HTML filename then you need to percent-encode that ‘#’ for a URI and not for a relative Windows file path.

If you specify a relative Windows file path, it is turned into an ms-appx URI by changing all backslashes to forward slashes, percent-encoding reserved characters, and combining the result with a base URI of ms-appx:///. Accordingly the relative Windows file paths are relative to the root of your package. If you are using a relative Windows file path as your StartPage and need to switch to using a URI so you can include a query or fragment, you can follow the same steps above.

StartPage validity

The validity of the StartPage is not determined before activation. If the StartPage is a relative Windows file path for a file that doesn’t exist, or an absolute URI that is not in the Application Content URI Rules, or something that doesn’t parse as a Windows file path or URI, or otherwise an absolute URI that fails to resolve (404, bad hostname, etc etc) then the JavaScript app will navigate to the app’s navigation error page (perhaps more on that in a future blog post). Just to call it out explicitly because I have personally accidentally done this: StartPage URIs are not automatically included in the Application Content URI Rules and if you forget to include your StartPage in your ACUR you will always fail to navigate to that StartPage.

StartPage navigation

When your app is activated for a particular activation kind, the StartPage value from the entry in your app’s manifest that corresponds to that activation kind is used as the navigation target. If the app is not already running, the app is activated, navigated to that StartPage value and then the Windows.UI.WebUI.WebUIApplication activated event is fired (more details on the order of various events in a moment). If, however, your app is already running and an activation occurs, we navigate or don’t navigate to the corresponding StartPage depending on the current page of the app. Take the app’s current top level document’s URI and if after removing the fragment it already matches the StartPage value then we won’t navigate and will jump straight to firing the WebUIApplication activated event.

Since navigating the top-level document means destroying the current JavaScript engine instance and losing all your state, this behavior might be a problem for you. If so, you can use the MSApp.pageHandlesAllApplicationActivations(true) API to always skip navigating to the StartPage and instead always jump straight to firing the WebUIApplication activated event. This does require of course that all of your pages all handle all activation kinds about which any part of your app cares.

Parsing WinMD files, the containers of WinRT API metadata, is relatively simple using the appropriate .NET reflection APIs. However, figuring out which reflection APIs to use is not obvious. I've got a completed C sharp class parsing WinMD files that you can check out for reference.

Use System.Reflection.Assembly.ReflectionOnlyLoad to load the WinMD file. Don't use the normal load methods because the WinMD files contain only metadata. This will load up info about APIs defined in that WinMD, but any references to types outside of that WinMD including types found in the normal OS system WinMD files must be resolved by the app code via the System.Reflection.InteropServices.WindowsRuntimeMetadata.ReflectionOnlyNamespaceResolve event.

In this event handler you must resolve the unknown namespace reference by adding an assembly to the NamespaceResolveEventArgs's ResolvedAssemblies property. If you're only interested in OS system WinMD files you can use System.Reflection.InteropServices.WindowsRuntimeMetadata.ResolveNamespace to turn a namespace into the expected OS system WinMD path and turn that path into an assembly with ReflectionOnlyLoad.

I've made a PowerShell script to show system toast notifications with WinRT and PowerShell. Along the way I learned several interesting things.

First off calling WinRT from PowerShell involves a strange syntax. If you want to use a class you write [-Class-,-Namespace-,ContentType=WindowsRuntime] first to tell PowerShell about the type. For example here I create a ToastNotification object:

[void][Windows.UI.Notifications.ToastNotification,Windows.UI.Notifications,ContentType=WindowsRuntime];
$toast = New-Object Windows.UI.Notifications.ToastNotification -ArgumentList $xml;

And here I call the static method CreateToastNotifier on the ToastNotificationManager class:

[void][Windows.UI.Notifications.ToastNotificationManager,Windows.UI.Notifications,ContentType=WindowsRuntime];
$notifier = [Windows.UI.Notifications.ToastNotificationManager]::CreateToastNotifier($AppUserModelId);

With this I can call WinRT methods and this is enough to show a toast but to handle the click requires a little more work.

To handle the user clicking on the toast I need to listen to the Activated event on the Toast object. However Register-ObjectEvent doesn't handle WinRT events. To work around this I created a .NET event wrapper class to turn the WinRT event into a .NET event that Register-ObjectEvent can handle. This is based on Keith Hill's blog post on calling WinRT async methods in PowerShell. With the event wrapper class I can run the following to subscribe to the event:

function WrapToastEvent {
    param($target, $eventName);

    Add-Type -Path (Join-Path $myPath "PoshWinRT.dll")
    $wrapper = new-object "PoshWinRT.EventWrapper[Windows.UI.Notifications.ToastNotification,System.Object]";
    $wrapper.Register($target, $eventName);
}

[void](Register-ObjectEvent -InputObject (WrapToastEvent $toast "Activated") -EventName FireEvent -Action { 
    ...
});

To handle the Activated event I want to put focus back on the PowerShell window that created the toast. To do this I need to call the Win32 function SetForegroundWindow. Doing so from PowerShell is surprisingly easy. First you must tell PowerShell about the function:

Add-Type @"
    using System;
    using System.Runtime.InteropServices;
    public class PInvoke {
        [DllImport("user32.dll")] [return: MarshalAs(UnmanagedType.Bool)]
        public static extern bool SetForegroundWindow(IntPtr hwnd);
    }
"@

Then to call:

[PInvoke]::SetForegroundWindow((Get-Process -id $myWindowPid).MainWindowHandle);

But figuring out the HWND to give to SetForegroundWindow isn't totally straight forward. Get-Process exposes a MainWindowHandle property but if you start a cmd.exe prompt and then run PowerShell inside of that, the PowerShell process has 0 for its MainWindowHandle property. We must follow up process parents until we find one with a MainWindowHandle:

$myWindowPid = $pid;
while ($myWindowPid -gt 0 -and (Get-Process -id $myWindowPid).MainWindowHandle -eq 0) {
    $myWindowPid = (gwmi Win32_Process -filter "processid = $($myWindowPid)" | select ParentProcessId).ParentProcessId;
}

2016-Nov-5: Updated post on using Let's Encrypt with NearlyFreeSpeech.net

I use NearlyFreeSpeech.net for my webhosting for my personal website and I've just finished setting up TLS via Let's Encrypt. The process was slightly more complicated than what you'd like from Let's Encrypt. So for those interested in doing the same on NearlyFreeSpeech.net, I've taken the following notes.

The standard Let's Encrypt client requires su/sudo access which is not available on NearlyFreeSpeech.net's servers. Additionally NFSN's webserver doesn't have any Let's Encrypt plugins installed. So I used the Let's Encrypt Without Sudo client. I followed the instructions listed on the tool's page with the addition of providing the "--file-based" parameter to sign_csr.py.

One thing the script doesn't produce is the chain file. But this topic "Let's Encrypt - Quick HOWTO for NSFN" covers how to obtain that:

curl -o domain.chn https://letsencrypt.org/certs/lets-encrypt-x1-cross-signed.pem

Now that you have all the required files, on your NFSN server make the directory /home/protected/ssl and copy your files into it. This is described in the NFSN topic provide certificates to NFSN. After copying the files and setting their permissions as described in the previous link you submit an assistance request. For me it was only 15 minutes later that everything was setup.

After enabling HTTPS I wanted to have all HTTP requests redirect to HTTPS. The normal Apache documentation on how to do this doesn't work on NFSN servers. Instead the NFSN FAQ describes it in "redirect http to https and HSTS". You use the X-Forwarded-Proto instead of the HTTPS variable because of how NFSN's virtual hosting is setup.

RewriteEngine on
RewriteCond %{HTTP:X-Forwarded-Proto} !https
RewriteRule ^.*$ https://%{SERVER_NAME}%{REQUEST_URI} [L,R=301]

Turning on HSTS is as simple as adding the HSTS HTTP header. However, the description in the above link didn't work because my site's NFSN realm isn't on the latest Apache yet. Instead I added the following to my .htaccess. After I'm comfortable with everything working well for a few days I'll start turning up the max-age to the recommended minimum value of 180 days.

Header set Strict-Transport-Security "max-age=3600;" 

Finally, to turn on CSP I started up Fiddler with my CSP Fiddler extension. It allows me to determine the most restrictive CSP rules I could apply and still have all resources on my page load. From there I found and removed inline script and some content loaded via http and otherwise continued tweaking my site and CSP rules.

After I was done I checked out my site on SSL Lab's SSL Test to see what I might have done wrong or needed improving. The first time I went through these steps I hadn't included the chain file which the SSL Test told me about. I was able to add that file to the same files I had already previously generated from the Let's Encrypt client and do another NFSN assistance request and 15 minutes later the SSL Test had upgraded me from 'B' to 'A'.