![['Neverending story' by Alexandre Duret-Lutz. A framed photo of books with the droste effect applied. Licensed under creative commons.]](http://farm1.static.flickr.com/90/252757784_3de44cbeb4_m_d.jpg)
Information about URI Fragments, the portion of URIs
that follow the '#' at the end and that are used to navigate within a document, is scattered throughout various documents which I usually have to hunt down. Instead I'll link to them all here.
Definitions. Fragments are defined in the URI RFC which states that they're used to identify a secondary resource that is related to the primary resource identified by the URI as a subset of the primary, a view of the primary, or some other resource described by the primary. The interpretation of a fragment is based on the mime type of the primary resource. Tim Berners-Lee notes that determining fragment meaning from mime type is a problem because a single URI may contain a single fragment, however over HTTP a single URI can result in the same logical resource represented in different mime types. So there's one fragment but multiple mime types and so multiple interpretations of the one fragment. The URI RFC says that if an author has a single resource available in multiple mime types then the author must ensure that the various representations of a single resource must all resolve fragments to the same logical secondary resource. Depending on which mime types you're dealing with this is either not easy or not possible.
HTTP. In HTTP when URIs are used, the fragment is not included. The General Syntax section of the HTTP standard says it uses the definitions of 'URI-reference' (which includes the fragment), 'absoluteURI', and 'relativeURI' (which don't include the fragment) from the URI RFC. However, the 'URI-reference' term doesn't actually appear in the BNF for the protocol. Accordingly the headers like 'Request-URI', 'Content-Location', 'Location', and 'Referer' which include URIs are defined with 'absoluteURI' or 'relativeURI' and don't include the fragment. This is in keeping with the original fragment definition which says that the fragment is used as a view of the original resource and consequently only needed for resolution on the client. Additionally, the URI RFC explicitly notes that not including the fragment is a privacy feature such that page authors won't be able to stop clients from viewing whatever fragments the client chooses. This seems like an odd claim given that if the author wanted to selectively restrict access to portions of documents there are other options for them like breaking out the parts of a single resource to which the author wishes to restrict access into separate resources.
HTML. In HTML, the HTML mime type RFC defines HTML's fragment use which consists of fragments referring to elements with a corresponding 'id' attribute or one of a particular set of elements with a corresponding 'name' attribute. The HTML spec discusses fragment use additionally noting that the names and ids must be unique in the document and that they must consist of only US-ASCII characters. The ID and NAME attributes are further restricted in section 6 to only consist of alphanumerics, the hyphen, period, colon, and underscore. This is a subset of the characters allowed in the URI fragment so no encoding is discussed since technically its not needed. However, practically speaking, browsers like FireFox and Internet Explorer allow for names and ids containing characters outside of the defined set including characters that must be percent-encoded to appear in a URI fragment. The interpretation of percent-encoded characters in fragments for HTML documents is not consistent across browsers (or in some cases within the same browser) especially for the percent-encoded percent.
Text. Text/plain recently got a fragment definition that allows fragments to refer to particular lines or characters within a text document. The scheme no longer includes regular expressions, which disappointed me at first, but in retrospect is probably good idea for increasing the adoption of this fragment scheme and for avoiding the potential for ubiquitous DoS via regex. One of the authors also notes this on his blog. I look forward to the day when this scheme is widely implemented.
XML. XML has the XPointer framework to define its fragment structure as noted by the XML mime type definition. XPointer consists of a general scheme that contains subschemes that identify a subset of an XML document. Its too bad such a thing wasn't adopted for URI fragments in general to solve the problem of a single resource with multiple mime type representations. I wrote more about XPointer when I worked on hacking XPointer into IE.
SVG and MPEG. Through the Media Fragments Working Group I found a couple more fragment scheme definitions. SVG's fragment scheme is defined in the SVG documentation and looks similar to XML's. MPEG has one defined but I could only find it as an ISO document "Text of ISO/IEC FCD 21000-17 MPEG-12 FID" and not as an RFC which is a little disturbing.
AJAX. AJAX websites have used fragments as an escape hatch for two issues that I've seen. The first is getting a unique URL for versions of a page that are produced on the client by script. The fragment may be changed by script without forcing the page to reload. This goes outside the rules of the standards by using HTML fragments in a fashion not called out by the HTML spec. but it does seem to be inline with the spirit of the fragment in that it is a subview of the original resource and interpretted client side. The other hack-ier use of the fragment in AJAX is for cross domain communication. The basic idea is that different frames or windows may not communicate in normal fashions if they have different domains but they can view each other's URLs and accordingly can change their own fragments in order to send a message out to those who know where to look. IMO this is not inline with the spirit of the fragment but is rather a cool hack.
More of my thoughts have been stolen: In my
previous job the customer wanted a progress bar displayed while information was copied off of proprietary hardware, during which the software didn't get any indication of progress until the copy
was finished. I joked (mostly) that we could display a progress bar that continuously slows down and never quite reaches the end until we know we're done getting info from the hardware. The amount
of progress would be a function of time where as time approaches infinity, progress approaches a value of at most 100 percent.
This is similar to Zeno's Paradox which says you can't cross a room because to do so first you must cross half the room, then you must cross half the remaining distance, then half the remaining again, and so on which means you must take an infinite number of steps. There's also an old joke inspired by Zeno's Paradox. The joke is the prototypical engineering vs sciences joke and is moderately humorous, but I think the fact that Wolfram has an interactive applet demonstrating the joke is funnier than the joke itself.
I recently found Lou Franco's blog post "Using Zeno's Paradox For Progress Bars" which covers the same concept as Zeno's Progress Bar but with real code. Apparently Lou wasn't making a joke and actually used this progress bar in an application. A progress bar that doesn't accurately represent progress seems dishonest. In cases like the Vista Defrag where the software can't make a reasonable guess about how long a process will take the software shouldn't display a progress bar.
Similarly a paper by Chris Harrison "Rethinking the Progress Bar" suggests that if a progress bar speeds up towards the end the user will perceive the operation as taking less time. The paper is interesting, but as in the previous case, I'd rather have progress accurately represented even if it means the user doesn't perceive the operation as being as fast.
Update: I should be clearer about Lou's post. He was actually making a practical and implementable suggestion as to how to handle the case of displaying progress when you have some idea of how long it will take but no indications of progress, whereas my suggestion is impractical and more of a joke concerning displaying progress with no indication of progress nor a general idea of how long it will take.
With the new features of IE8 there's several easy ways to integrate Gmail, Google's web mail service, for mail composition, searching, and monitoring that I enjoy using.
Internet Explorer 8 has made my plugin Feed Folder obselete in functionality and implementation -- which is good!
I made Feed Folder for IE7 because I wanted the Live Bookmarking feature from FireFox. The Feed Folder plugin for IE7 would allow you to display your feeds as virtual folders in your Links Bar. When your feed is updated the virtual folder is updated as well with the new feed items. I use del.icio.us to store all my links so I could add virtual folders of my daily links, my friends blogs links, quick reference links, etc. etc.
My plugin relied on shell folders to implement the virtual folders I described above, but IE8 doesn't support shell folders in the Favorites Bar. But I'm OK with Feed Folder not working in IE8 since there's a much better implementation already there. IE8 does better than my plugin on a number of points: First, there isn't the horrible perf. issue that my plugin had on Vista. Second, when a feed is updated the virtual folder flashes to note the change in status. Third, unread items are bolded and the bolding bubbles up from feeds contained in subfolders. And lastly, the middle click button is supported to open items in a new tab.
Accordingly, I don't plan to work on Feed Folder anymore unless someone comes up with a good reason. Instead I mark Feed Folder deprecated and suggest you use Internet Explorer 8 instead.
To use this feature in IE8 simply drag a feed from your feed list in your Favorites Center onto your Favorites Bar. Or, when viewing a feed, click on the 'Add to Favorites' Star Plus icon thing in the upper left, and select 'Monitor on Favorites Bar'. A .url Internet Shortcut file is produced as usual, but if you open up the .url file you'll see there's some additional info about the feed.
Two weekends ago it was actually sunny and kind of warm so Sarah and I went down to Spud Fish and Chips and Juanita Beach Park. We ate fish and chips on the dock. I took a few pictures and this
time actually put some geographical information on Flickr so now I've got a map of my tiny fish and chips journey. On the map click on the floating marks to view the associated photos.
Flickr provides access to the geo data associated with your photos via GeoRSS feeds. And Google Maps displays GeoRSS feed content on their maps allowing you even to edit the data but doesn't appear to let you easily export the GeoRSS. Live Maps does the inverse, allowing you to create and export GeoRSS data but not import it. I'd like both please. Oh well.
Internet Explorer 8 Beta 1 is available now. I can finally talk about some of the stuff I've been working on for the past year or so: activities. Activities let you select a document, some text on a document, or a link to a document and run that selection through a web service. For example, you could select a word on a webpage and look it up in Wikipedia, select an address and map it on Yahoo Maps, select a webpage and translate it into English with Windows Live Translator, or select a link and add it to Digg.
IE8 comes installed with some activities based on Microsoft web services but there's a page you can go to to
install other activities. However, that page is missing some of my favorites that I use all the time, like del.icio.us.
Accordingly, I've put together a page of the activities I use. MSDN has all the info on creating Activities.
Activities are very similar to other existing features in other browsers including the ability to add context menu items to IE. There's two important differences which make activities better. Activities have a preview window that pops out when you hover over an activity, which is useful to get in place information easily provided by developers. The other is that the interface is explicit and takes after HTML FORMs and OpenSearch descriptions. Because the interface is explicitly described in XML (unlike the context menu additions described above which run arbitrary script) we have the ability to use activities in places other than on a webpage in the future. And because activity definitions are similar to HTML FORMs, if your webservice has an HTML FORM describing it you can easily create an activity.
This post is about creating a server side z-code
interpreter that represents game progress in the URI. Try it with the game Lost
Pig.
I enjoy working on URIs and have the mug to prove it. Along those lines I've combined thoughts on URIs with interactive fiction. I have a limited amount of experience with Inform which generates Z-Code so I'll focus on pieces written in that. Of course we can already have URIs identifying the Z-Code files themselves, but I want URIs to identify my place in a piece of interactive fiction. The proper way to do this would be to give Z-Code its own mimetype and associate with that mimetype the format of a fragment that would contain the save state of user's interactive fiction session. A user would install a browser plugin that would generate URIs containing the appropriate fragment while you play the IF piece and be able to load URIs identifying Z-Code files and load the save state that appears in the fragment.
But all of that would be a lot of work, so I made a server side version that approximates this. On the Web Frotz Interpreter page, enter the URI of a Z-Code file to start a game. Enter your commands into the input text box at the bottom and you get a new URI after every command. For example, here's the beginning of Zork. I'm running a slightly modified version of the Unix version of Frotz. Baf's Guide to the IF Archive has lists of IF games to try out.
There are two issues with this thought, the first being the security issues with running arbitrary z-code and the second is the practical URI length limit of about 2K in IE. From the Z-Code standard and the Frotz source it looks like 'save' and 'restore' are the only commands that could do anything interesting outside of the Z-Code virtual machine. As for the length-limit on URIs I'm not sure that much can be done about that. I'm using a base64 encoded copy of the compressed input stream in the URI now. Switching to the actual save state might be smaller after enough user input.
At the grocery store the other day Sarah and I attempted to find shallot for a recipe, but I can't
tell the difference between shallot, sweet onions, yellow onions, etc. etc. We found something that we decided was the closest we'd find in the store and I believe we picked correctly because at
checkout the cashier rang it up as shallot.
I think this could be
a practical problem that the 20q Pocket Mind Reader should be able to solve: obtain the name of an unidentified object. When we got home
I decided to test the 20q Pocket Mind Reader on shallot. Unfortunately, it told me I had an onion, but I think if these were designed for identifying unknown objects based solely on information you
can obtain by looking at it, rather than requiring knowledge of seeds, where it grows, etc. it would do better. Or I could just ask someone who works at the grocery store.
I signed up for the pre-release beta and purchased a Chumby last year. Chumby looks like a cousin to a GPS
unit. Its similar in size with a touch screen, but has WiFi, accelerometers, and is pillow like on the sides that aren't a screen. In practice its like an Internet alarm clock that shows you photos
and videos off the Web. Its hackable in that Chumby Industries tells you about the various ways to run your own stuff on the Chumby, modifying the boot sequence (it runs Linux), turning on sshd,
etc, etc. The Chumby forum too has lots of info from folks who have found interesting hacks for the device.
When you turn on the Chumby it downloads and runs the latest version of the Chumby software which lets you set alarms, play music, and display Flash widgets. The Chumby website lets anyone upload their own Flash widgets to share with the community. I tried my hand at creating one using Adobe's free Flash creation SDK but I don't know Flash and didn't have the patience to learn.
Currently my Chumby is set to wake me up at 8am on weekdays with music from ShoutCast and then displays traffic and weather. At 10am everyday it switches to showing me a slide-show of LolCats. At 11pm it switches to night mode where it displays the time in dark grey text on a black background at a reduced light level so as not to disturb me while I sleep.
I like the Chumby but I have two complaints. The first is that it forces me to learn flash in order to create anything cool rather than having a built-in Web browser or depending on a more Web friendly technology. The second complaint is about its name. At first I thought the name was stupid in a kind of silly way, but now that I'm used to the name it sounds vaguely dirty.
Some rights reserved