ace page 2 - Dave's Blog

You can use conditional breakpoints and debugging commands in windbg and cdb that together can amount to effectively patching a binary at runtime. This can be useful if you have symbols but you can't easily rebuild the binary. Or if the patch is small and the binary requires a great deal of time to rebuild.

Skipping code

If you want to skip a chunk of code you can set a breakpoint at the start address of the code to skip and set the breakpoint's command to change the instruction pointer register to point to the address at the end of the code to skip and go. Voila you're skipping over that code now. For example:

bp 0x6dd6879b "r @eip=0x6dd687c3 ; g"

Changing parameters

You may want to modify parameters or variables and this is simple of course. In the following example a conditional breakpoint ANDs out a bit from dwFlags. Now when we run its as if no one is passing in that flag.

bp wiwi!RelativeCrack "?? dwFlags &= 0xFDFFFFFF;g"

Slightly more difficult is to modify string values. If the new string length is the same size or smaller than the previous, you may be able to modify the string value in place. But if the string is longer or the string memory isn't writable, you'll need a new chunk of memory into which to write your new string. You can use .dvalloc to allocate some memory and ezu to write a string into the newly allocated memory. In the following example I then overwrite the register containing the parameter I want to modify:

.dvalloc 100
ezu 000002a9`d4eb0000 "mfcore.dll"
r rcx = 000002a9`d4eb0000

Calling functions

You can also use .call to actually make new calls to methods or functions. Read more about that on the Old New Thing: Stupid debugger tricks: Calling functions and methods. Again, all of this can be used in a breakpoint command to effectively patch a binary.

I've made a Unicode Clock in JavaScript.

Unicode has code points for all 30 minute increments of clock faces. This is a simple project to display the one closest to the current time written in JavaScript.

Because the code points are all above 0xFFFF, I make use of some ES6 additions. I use the \u{XXXXXX} style escape sequence since the old style JavaScript escape sequence \uXXXX only supports code points up to 0xFFFF. I also use the method String.codePointAt rather than String.charCodeAt because the code points larger than 0xFFFF are represented in JavaScript strings using surrogate pairs and charCodeAt gives the surrogate value rather than codePointAt which gives the code point represented by the pair of surrogates.

"🕛".codePointAt(0)
128347
"🕛".charCodeAt(0)
55357

🕐🕑🕒🕓🕔🕕🕖🕗🕘🕙🕚🕛🕜🕝🕞🕟🕠🕡🕢🕣🕤🕥🕦🕧

The ordering of the code points does not make it simple to do this. I initially guessed the first code point in the range would be 12:00 followed by 12:30, 1:00 and so on. But actually 1:00 is first followed by all the on the hour times then all the half hour times.

MSDN covers the topic of JavaScript and WinRT type conversions provided by Chakra (JavaScript Representation of Windows Runtime Types and Considerations when Using the Windows Runtime API), but for the questions I get about it I’ll try to lay out some specifics of that discussion more plainly. I’ve made a TL;DR JavaScript types and WinRT types summary table.

Chakra, the JavaScript engine powering the Edge browser and JavaScript Windows Store apps, does the work to project WinRT into JavaScript. It is responsible for, among other things, converting back and forth between JavaScript types and WinRT types. Some basics are intuitive, like a JavaScript string is converted back and forth with WinRT’s string representation. For other basic types check out the MSDN links at the top of the page. For structs, interface instances, class instances, and objects things are more complicated.

A struct, class instance, or interface instance in WinRT is projected into JavaScript as a JavaScript object with corresponding property names and values. This JavaScript object representation of a WinRT type can be passed into other WinRT APIs that take the same underlying type as a parameter. This JavaScript object is special in that Chakra keeps a reference to the underlying WinRT object and so it can be reused with other WinRT APIs.

However, if you start with plain JavaScript objects and want to interact with WinRT APIs that take non-basic WinRT types, your options are less plentiful. You can use a plain JavaScript object as a WinRT struct, so long as the property names on the JavaScript object match the WinRT struct’s. Chakra will implicitly create an instance of the WinRT struct for you when you call a WinRT method that takes that WinRT struct as a parameter and fill in the WinRT struct’s values with the values from the corresponding properties on your JavaScript object.

// C# WinRT component
        public struct ExampleStruct
        {
            public string String;
            public int Int;
        }

        public sealed class ExampleStructContainer
        {
            ExampleStruct value;
            public void Set(ExampleStruct value)
            {
                this.value = value;
            }

            public ExampleStruct Get()
            {
                return this.value;
            }
        }

// JS code
        var structContainer = new ExampleWinRTComponent.ExampleNamespace.ExampleStructContainer();
        structContainer.set({ string: "abc", int: 123 });
        console.log("structContainer.get(): " + JSON.stringify(structContainer.get()));
        // structContainer.get(): {"string":"abc","int":123}

You cannot have a plain JavaScript object and use it as a WinRT class instance or WinRT interface instance. Chakra does not provide such a conversion even with ES6 classes.

You cannot take a JavaScript object with arbitrary property names that are unknown at compile time and don’t correspond to a specific WinRT struct and pass that into a WinRT method. If you need to do this, you have to write additional JavaScript code to explicitly convert your arbitrary JavaScript object into an array of property name and value pairs or something else that could be represented in WinRT.

However, the other direction you can do. An instance of a Windows.Foundation.Collections.IPropertySet implementation in WinRT is projected into JavaScript as a JavaScript object with property names and values corresponding to the key and value pairs in the IPropertySet. In this way you can project a WinRT object as a JavaScript object with arbitrary property names and types. But again, the reverse is not possible. Chakra will not convert an arbitrary JavaScript object into an IPropertySet.

// C# WinRT component
        public sealed class PropertySetContainer
        {
            private Windows.Foundation.Collections.IPropertySet otherValue = null;

            public Windows.Foundation.Collections.IPropertySet other
            {
                get
                {
                    return otherValue;
                }
                set
                {
                    otherValue = value;
                }
            }
        }

        public sealed class PropertySet : Windows.Foundation.Collections.IPropertySet
        {
            private IDictionary map = new Dictionary();

            public PropertySet()
            {
                map.Add("abc", "def");
                map.Add("ghi", "jkl");
                map.Add("mno", "pqr");
            }
            // ... rest of PropertySet implementation is simple wrapper around the map member.
            

// JS code
    var propertySet = new ExampleWinRTComponent.ExampleNamespace.PropertySet();
    console.log("propertySet: " + JSON.stringify(propertySet));
    // propertySet: {"abc":"def","ghi":"jkl","mno":"pqr"}

    var propertySetContainer = new ExampleWinRTComponent.ExampleNamespace.PropertySetContainer();
    propertySetContainer.other = propertySet;
    console.log("propertySetContainer.other: " + JSON.stringify(propertySetContainer.other));
    // propertySetContainer.other: {"abc":"def","ghi":"jkl","mno":"pqr"}

    try {
        propertySetContainer.other = { "123": "456", "789": "012" };
    }
    catch (e) {
        console.error("Error setting propertySetContainer.other: " + e);
        // Error setting propertySetContainer.other: TypeError: Type mismatch
}

There’s also no way to implicitly convert a DOM object into a WinRT type. If you want to write third party WinRT code that interacts with the DOM, you must do so indirectly and explicitly in JavaScript code that is interacting with your third party WinRT. You’ll have to extract the information you want from your DOM objects to pass into WinRT methods and similarly have to pass messages out from WinRT that say what actions the JavaScript should perform on the DOM.