local page 2 - Dave's Blog

Creating Accelerators for Other People's Web Services

Before we shipped IE8 there were no Accelerators, so we had some fun making our own for our favorite web services. I've got a small set of tips for creating Accelerators for other people's web services. I was planning on writing this up as an IE blog post, but Jon wrote a post covering a similar area so rather than write a full and coherent blog post I'll just list a few points:

• The first thing to try is looking for developer help for the web service, specifically if there's a REST-ful URL based API. For example, Bing Maps has great URL API documentation that would be enough to create an Accelerator.
• The Accelerator XML is very similar to HTML forms. If you can find an HTML form for the web service for which you want to create an Accelerator, you can view the HTML source and create an Accelerator based on that.
• I created the FormToAccelerator extension based on the previous idea. You can use the extension to create an Accelerator from an HTML form, or just use it to create the start of one and edit it manually after.
• If the page doesn't use an HTML form, you can start up an HTTP debugger like Fiddler, use the web service from the normal web page, and then in Fiddler see if you can find a REST-ful looking URL you can use.
• When looking to create a preview for your Accelerator, see if the web page for the web service has a mobile version or a version that's intended to embed in other web pages via an iframe. On this same line, iPhone apps make great Accelerators usually with lovely previews.
• If there's no mobile or embeddable version and the only thing wrong with the normal web page for the web service is that the useful information doesn't fit in the preview window then see if you can find an HTML tag with a name or id near the useful information, and stick a '#' fragment pointing to that tag onto the preview URL template.
• Without a reasonable REST-ful API you can use a combination of Google's "site:" and "I'm Feeling Lucky" to find the most relevant page on a particular site.
• The value of a name and value pair need not consist of only a single Accelerator variable. You can get creative and put other text in there. For instance, I implemented a Google currency conversion by setting the query to "{selection} in US Dollars".

IE8 Search Providers, Accelerators, and Local Applications Hack

There's no easy way to use local applications on a PC as the result of an accelerator or a search provider in IE8 but there is a hack-y/obvious way, that I'll describe here. Both accelerators and search providers in IE8 fill in URL templates and navigate to the resulting URL when an accelerator or search provider is executed by the user. These URLs are limited in scheme to http and https but those pages may do anything any other webpage may do. If your local application has an ActiveX control you could use that, or (as I will provide examples for) if the local application has registered for an application protocol you can redirect to that URL. In any case, unfortunately this means that you must put a webpage on the Internet in order to get an accelerator or search provider to use a local application.

For examples of the app protocol case, I've created a callto accelerator that uses whatever application is registered for the callto scheme on your system, and a Windows Search search provider that opens Explorer's search with your search query. The callto accelerator navigates to my redirection page with 'callto:' followed by the selected text in the fragment and the redirection page redirects to that callto URL. In the Windows Search search provider case the same thing happens except the fragment contains 'search-ms:query=' followed by the selected text, which starts Windows Search on your system with the selected text as the query. I've looked into app protocols previously.

Kirkland Uncorked Weekend

Saturday we went to Kirkland Uncorked, a wine tasting festival near our home. We took the bus and after finding the correct one (they really should have different numbers for buses that are on the same route but traveling in different directions) made it to the festival. Unfortunately I don't remember any of the names of the wines just which ones I enjoyed by order. Recalling that I enjoyed the first one I had and the second to last one, doesn't really help me find them again. There were local artists who had setup booths and Sarah got a lovely necklace. After that we ate at Cactus which, because it was such a lovely day, had all its windows and doors open.

Sunday was quieter. A few household chores and plenty of GTA4. I almost got the One Man Army achievement but I found that after four minutes with six stars I eventually dropped back down to three stars without realizing it.

Attended Savor Seattle

This past Saturday Sarah and I took the Savor Seattle Tour of various food shops in Pikes Place. Sarah had suggested it at one point and when Jesse and Nicole brought it up again when they came up to Seattle we decided to go. Surprisingly our tour group consisted of mostly locals. Except for the fish market I hadn't been to see any of the places on the tour. I particularly enjoyed the chocolate cherries and the tea. Our tour guide Tim was funny and overall I enjoyed the tour and would recommend it. I've made a map of our tour including what free trials we got at each location. Yum!

IPv6 Roundup: Address Syntax on Windows

IPv6 address syntax consists of 8 groupings of colon delimited 16-bit hex values making up the 128-bit address. An optional double colon can replace any consecutive sequence of 0 valued hex values. For example the following is a valid IPv6 address: fe80::2c02:db79

Some IPv6 addresses aren't global and in those cases need a scope ID to describe their context. These get a '%' followed by the scope ID. For example the previous example with a scope ID of '8' would be: fe80::2c02:db79%8

IPv6 addresses in URIs may appear in the host section of a URI as long as they're enclosed by square brackets. For example: http://[fe80::2c02:db79]/. The RFC explicitly notes that there isn't a way to add a scope ID to the IPv6 address in a URI. However a draft document describes adding scope IDs to IPv6 addresses in URIs. The draft document uses the IPvFuture production from the URI RFC with a 'v1' to add a new hostname syntax and a '+' instead of a '%' for delimiting the scope id. For example: http://[v1.fe80::2c02:db79+8]/. However, this is still a draft document, not a final standard, and I don't know of any system that works this way.

In Windows XPSP2 the IPv6 stack is available but disabled by default. To enable the IPv6 stack, at a command prompt run 'netsh interface ipv6 install'. In Vista IPv6 is the on by default and cannot be turned off, while the IPv4 stack is optional and may be turned off by a command similar to the previous.

Once you have IPv6 on in your OS you can turn on IPv6 for IIS6 or just use IIS7. The address ::1 refers to the local machine.

In some places in Windows like UNC paths, IPv6 addresses aren't allowed. In those cases you can use a Vista DNS IPv6 hack that lives in the OS name resolution stack that transforms particularly crafted names into IPv6 addresses. Take your IPv6 address, replace the ':'s with '-'s and the '%' with an 's' and then append '.ipv6-literal.net' to the end. For example: fe80--2c02-db79s8.ipv6-literal.net. That name will resolve to the same example I've been using in Vista. This transformation occurs inside the system's local name resolution stack so no DNS servers are involved, although Microsoft does own the ipv6-literal.net domain name.

MSDN describes IPv6 addresses in URIs in Windows and I've described IPv6 addresses in URIs in IE7. File URIs in IE7 don't support IPv6 addresses. If you want to put a scope ID in a URI in IE7 you use a '%25' to delimit the scope ID and due to a bug you must have at least two digits in your scope ID. So, to take the previous example: http://[fe80::2c02:db79%2508]/. Note that its 08 rather than just 8.

Old Miscellaneous Thoughts

• A History Channel program had a reenactment of a 1920's archaeologist discovering a stone tablet, sending the tablet to a warehouse, etc. all behind the voice over giving the dry facts. The reenactor hammed it up a bit and I would have rather had clips from Indiana Jones in the background. If they're already not showing me the archaeologist who discovered the tablet, they may as well show me one who will be entertaining.
• There are many parodies of the Get a Mac ads and so when I saw a UK Get a Mac ad I payed attention to see what the joke was. I was disappointed by the 'parody' because it was a conventional Get a Mac ad with different actors. Apple localized their Get a Mac ad campaign in this fashion in the UK and in Japan. I've got a playlist of the US, UK, and Japan's version of the Piechart ad. Ranking the lovable bumblingness of the PC I give the order UK, Japan, then US and ranking the sumgness of the Mac I give the order UK, US, then Japan. But don't take my word for it, view the ads for yourself.
  
• Yahoo Pipes lets users generate an RSS feed altering service that runs on Yahoo's server using a GUI. This is very different from Microsoft's Popfly which allows users to component-ize and share javascript utilities that run client side on a webbrowser. Both have the awesome power of buzzword associations like 'Web 2.0' and 'Mashup' but in my mind Yahoo Pipes is for server side RSS feed modification and Popfly is about client side javascript webpages. And neither will allow me to run an arbitrary XSLT =).

California Trip

Backup Notes

sudo fdisk /dev/sda

m

help

p

print current partitions

d

delete current partition

n

create new partition (I used the defaults)

w

write changes and exit

sudo mkfs.ext3 /dev/sda1

sudo vim /etc/fstab
# added line to end:
/dev/sda1 /media/backup ext3 rw,user,noauto 0 0

mount /media/backup
sudo mkdir /media/backup/users
sudo mkdir /media/backup/users/dave
sudo chown dave:dave /media/backup/users/dave

mount /media/backup
cp -Rv /home/dave/svn /media/backup/users/dave/
umount /media/backup

svn co file:///home/dave/svn/trunk/web/dave%40deletethis.net/public_html

svn help

help

svn list file:///home/dave/svn/

list all files in root dir of svn depot

svn list -R file:///home/dave/svn/

list all files in svn depot

svn list -R file:///home/dave/svn/ | grep \/$

list all directories

svn status

List status of all files in the working copy directory as in - modified, not in repository, etc

svn update

Brings the working copy up to date wrt the repository

svn commit

Commit changes from the working copy to the repository

svn add / move / delete

Perform the specified action -- occurs immediately

putty.exe dave@deletethis.net
cd .ssh
vim authorized_keys # leave the putty window open for now
puttygen.exe
Click the 'generate' button
Move the mouse around until finished
Copy text in 'Public key for pasting into OpenSSH authorized_keys file:' to putty window & save & close putty window
Enter Key passphrase & Comment in puttygen
Save the private key somewhere private
pageant.exe
'Add Key' the private key just saved.

svn+ssh://dave@deletethis.net/home/dave/svn/trunk/web/dave%40deletethis.net/public_html/

set SVN_SSH=C:\\users\\dave\\bin\\putty\\plink.exe