tool page 2 - Dave's Blog

Compress doesn't seem to be supported by popular current browsers, possibly due to its past with patents.

Deflate isn't done correctly all the time. Some servers would send the deflate data format instead of the zlib data format and at least some versions of Internet Explorer expect deflate data format instead of zlib data format.

I'm done playing Fez. The style is atmospheric retro nastalgia and on the surface the gameplay is standard 2D platformer with one interesting Flatland style game mechanic but dig deeper to find Myst style puzzles. Despite the following I thoroughly enjoyed the game and would recommend it to anyone intrigued by the previous. Five eighths through the game I ran into one of the game's infamous Fez save game breaking issues, but I enjoyed the game enough that I started over before any patches were released and had no further issues.

While playing the game I created some tools to help keep track of my Fez notes (spoilers) including a Pixelated Image Creator that makes it easy to generate data URIs for large, black and white pixelated images, and (spoilers) a Fez Transliteration Tool to help me translate the in-game writing system.

By the URI RFC there is only one way to represent a particular IPv4 address in the host of a URI. This is the standard dotted decimal notation of four bytes in decimal with no leading zeroes delimited by periods. And no leading zeros are allowed which means there's only one textual representation of a particular IPv4 address.

However as discussed in the URI RFC, there are other forms of IPv4 addresses that although not officially allowed are generally accepted. Many implementations used inet_aton to parse the address from the URI which accepts more than just dotted decimal. Instead of dotted decimal, each dot delimited part can be in decimal, octal (if preceded by a '0') or hex (if preceded by '0x' or '0X'). And that's each section individually - they don't have to match. And there need not be 4 parts: there can be between 1 and 4 (inclusive). In case of less than 4, the last part in the string represents all of the left over bytes, not just one.

For example the following are all equivalent:

192.168.1.1

Standard dotted decimal form

0300.0250.01.01

Octal

0xC0.0XA8.0x1.0X1

Hex

192.168.257

Fewer parts

0300.0XA8.257

All of the above

The bread and butter of URI related security issues is when one part of the system disagrees with another about the interpretation of the URI. So this non-standard, non-normal form syntax has been been a great source of security issues in the past. Its mostly well known now (CreateUri normalizes these non-normal forms to dotted decimal), but occasionally a good tool for bypassing naive URI blocking systems.

I've been working on the Glitch Helperator. It is a collection of tools and things I've put together for Glitch. It has a few features that I haven't seen elsewhere including:

Favorite Streets

A notebook in which you can save information about interesting streets and later use it to find your way back to them.

Birthday

Find out how old your Glitch is and the date of your next birthday in Glitch time or Earth time.

API Update History

A history of changes to the streets, skills and achievements of Glitch noting when new ones are added and when existing ones are changed.

Sarah and I have been enjoying Glitch for a while now. Reviews are usually positive although occasionally biting (but mostly accurate).

I enjoy Glitch as a game of exploration: exploring the game's lands with hidden and secret rooms, and exploring the games skills and game mechanics. The issue with my enjoyment coming from exploration is that after I've explored all streets and learned all skills I've got nothing left to do. But I've found that even after that I can have fun writing client side JavaScript against Glitch's web APIs making tools (I work on the Glitch Helperator) for use in Glitch. And on a semi-regular basis they add new features reviving my interest in the game itself.

As a professional URI aficionado I deal with various levels of ignorance on URI percent-encoding (aka URI encoding, or URL escaping). The basest ignorance is with respect to the mere existence of percent-encoding. Percents in URIs are special: they always represent the start of a percent-encoded octet. That is to say, a percent is always followed by two hex digits that represents a value between 0 and 255 and doesn't show up in a URI otherwise.

The IPv6 textual syntax for scoped addresses uses the '%' to delimit the zone ID from the rest of the address. When it came time to define how to represent scoped IPv6 addresses in URIs there were two camps: Folks who wanted to use the IPv6 format as is in the URI, and those who wanted to encode or replace the '%' with a different character. The resulting thread was more lively than what shows up on the IETF URI discussion mailing list. Ultimately we went with a percent-encoded '%' which means the percent maintains its special status and singular purpose.

A bug came up the other day involving markup containing <input type="image" src="http://example.com/.... I knew that "image" was a valid input type but it wasn't until that moment that I realized I didn't know what it did. Looking it up I found that it displays the specified image and when the user clicks on the image, the form is submitted with an additional two name value pairs: the x and y positions of the point at which the user clicked the image.

Take for example the following HTML:

<form action="http://example.com/">
<input type="image" name="foo" src="http://deletethis.net/dave/images/davebefore.jpg">
</form>

This seemed like an incredibly specific feature to be built directly into the language when this could instead be done with javascript. I looked a bit further and saw that its been in HTML since at least HTML2, which of course makes much more sense. Javascript barely existed at that point and sending off the user's click location in a form may have been the only way to do something interesting with that action.

I wanted to ensure that my switch statement in my implementation of IInternetSecurityManager::ProcessURLAction had a case for every possible documented URLACTION. I wrote the following short command line sequence to see the list of all URLACTIONs in the SDK header file not found in my source file:

grep URLACTION urlmon.idl | sed 's/.*\(URLACTION[a-zA-Z0-9_]*\).*/\1/g;' | sort | uniq > allURLACTIONs.txt
grep URLACTION MySecurityManager.cpp | sed 's/.*\(URLACTION[a-zA-Z0-9_]*\).*/\1/g;' | sort | uniq > myURLACTIONs.txt
comm -23 allURLACTIONs.txt myURLACTIONs.txt

But in my effort to learn and use PowerShell I found the following similar command line:

diff 
(more urlmon.idl | %{ if ($_ -cmatch "URLACTION[a-zA-Z0-9_]*") { $matches[0] } } | sort -uniq) 
(more MySecurityManager.cpp | %{ if ($_ -cmatch "URLACTION[a-zA-Z0-9_]*") { $matches[0] } } | sort -uniq)

When you run clip.exe, whatever comes into its standard input is put onto the clipboard. So when you need to move the result of something in your command window somewhere else you can pipe the result into clip.exe. Then you won't have to worry about the irritating way cmd.exe does block copy/pasting and you avoid having to manually fixup line breaks in wrapped lines. For instance, you can put the contents of a script into the clipboard with:

more cdo.cmd | clip

I've got a lot of stuff dumped in my bin folder that I sync across all my PCs so I didn't realize that clip.exe is a part of standard Windows installs.

Nice for avoiding the block copy in cmd.exe but I'd prefer to have the contents sort of tee'd into the clipboard and standard output. So TeeClip.ps1:

$input | tee -var teeclipout | clip;
$teeclipout;

I've made GeolocMock. If your PC has no geolocation devices, IE9 uses a webservice to determine your location. GeolocMock uses FiddlerCore to intercept the response from the webservice and allows the user to replace the location in the response with another. This was a fun weekend project in order to play with FiddlerCore, the W3C Geoloc APIs in IE9, hosting the IE9 WebOC in a .NET app, and the Bing Maps APIs.

I've made two simple command line tools related to the console window and Win7 jump lists. The source is available for both but neither is much more than the sort of samples you'd find on MSDN =).

• SetAppUserModelId
• SetJumpList

SetAppUserModelId lets you change the Application User Model ID for the current console window. The AppUserModelId is the value Win7 uses to group together icons on the task bar and is what the task bar's jump lists are associated with. The tool lets you change that as well as the icon and name that appear in the task bar for the window, and the command to launch if the user attempts to re-launch the application from its task bar icon.

SetJumpList lets you set the jump list associated with a particular AppUserModelId. You pass the AppUserModelId as the only parameter and then in its standard input you give it lines specifying items that should appear in the jump list and what to execute when those items are picked.

I put these together to make my build environment easier to deal with at work. I have to deal with multiple enlistments in many different branches and so I wrote a simple script around these two tools to group my build windows by branch name in the task bar, and to add the history of commands I've used to launch the build environment console windows to the jump list of each.