urn page 3 - Dave's Blog

Level 8 of the Stripe CTF is a password server that returns success: true if and only if the password provided matches the password stored directly via a RESTful API and optionally indirectly via a callback URI. The solution is side channel attack like a timing attack but with ports instead of time.

(I found this in my drafts folder and had intended to post a while ago.)

Code

    def nextServerCallback(self, data):
        parsed_data = json.loads(data)
        # Chunk was wrong!
        if not parsed_data['success']:
            # Defend against timing attacks
            remaining_time = self.expectedRemainingTime()
            self.log_info('Going to wait %s seconds before responding' %
                          remaining_time)
            reactor.callLater(remaining_time, self.sendResult, False)
            return

        self.checkNext()

Issue

The password server breaks the target password into four pieces and stores each on a different server. When a password request is sent to the main server it makes requests to the sub-servers for each part of the password request. It does this in series and if any part fails, then it stops midway through. Password requests may also be made with corresponding URI callbacks and after the server decides on the password makes an HTTP request on the provided URI callbacks saying if the password was success: true or false.
A timing attack looks at how long it took for a password to be rejected and longer times could mean a longer prefix of the password was correct allowing for a directed brute force attack. Timing attacks are prevented in this case by code on the password server that attempts to wait the same amount of time, even if the first sub-server responds with false. However, the server uses sequential outgoing port numbers shared between the requests to the sub-servers and the callback URIs. Accordingly, we can examine the port numbers on our callback URIs to direct a brute force attack.
If the password provided is totally incorrect then the password server will contact one sub-server and then your callback URI. So if you see the remote server's port number go up by two when requesting your callback URI, you know the password is totally incorrect. If by three then you know the first fourth of the password is correct and the rest is incorrect. If by four then two fourths of the password is correct. If by five then four sub-servers were contacted so you need to rely on the actual content of the callback URI request of 'success: true' or 'false' since you can't tell from the port change if the password was totally correct or not.
The trick in the real world is false positives. The port numbers are sequential over the system, so if the password server is the only thing making outgoing requests then its port numbers will also be sequential, however other things on the system can interrupt this. This means that the password server could contact three sub-servers and normally you'd see the port number increase by four, but really it could increase by four or more because of other things running on the system. To counteract this I ran in cycles: brute forcing the first fourth of the password and removing any entry that gets a two port increase and keeping all others. Eventually I could remove all but the correct first fourth of the password. And so on for the next parts of the password.
I wrote my app to brute force this in Python. This was my first time writing Python code so it is not pretty.

Level 7 of the Stripe CTF involved running a length extension attack on the level 7 server's custom crypto code.

Code

@app.route('/logs/')
@require_authentication
def logs(id): 
    rows = get_logs(id) 
    return render_template('logs.html', logs=rows) 

...

def verify_signature(user_id, sig, raw_params):
    # get secret token for user_id
    try:
        row = g.db.select_one('users', {'id': user_id})
    except db.NotFound:
        raise BadSignature('no such user_id')
    secret = str(row['secret'])

    h = hashlib.sha1()
    h.update(secret + raw_params)
    print 'computed signature', h.hexdigest(), 'for body', repr(raw_params)
    if h.hexdigest() != sig:
        raise BadSignature('signature does not match')
    return True

Issue

The level 7 web app is a web API in which clients submit signed RESTful requests and some actions are restricted to particular clients. The goal is to view the response to one of the restricted actions. The first issue is that there is a logs path to display the previous requests for a user and although the logs path requires the client to be authenticatd, it doesn't restrict the logs you view to be for the user for which you are authenticated. So you can manually change the number in the '/logs/[#]' to '/logs/1' to view the logs for the user ID 1 who can make restricted requests. The level 7 web app can be exploited with replay attacks but you won't find in the logs any of the restricted requests we need to run for our goal. And we can't just modify the requests because they are signed.

However they are signed using their own custom signing code which can be exploited by a length extension attack. All Merkle–Damgård hash algorithms (which includes MD5, and SHA) have the property that if you hash data of the form (secret + data) where data is known and the length but not content of secret is known you can construct the hash for a new message (secret + data + padding + newdata) where newdata is whatever you like and padding is determined using newdata, data, and the length of secret. You can find a sha-padding.py script on VNSecurity blog that will tell you the new hash and padding per the above. With that I produced my new restricted request based on another user's previous request. The original request was the following.

count=10&lat=37.351&user_id=1&long=%2D119.827&waffle=eggo|sig:8dbd9dfa60ef3964b1ee0785a68760af8658048c

The new request with padding and my new content was the following.

count=10&lat=37.351&user_id=1&long=%2D119.827&waffle=eggo%80%02%28&waffle=liege|sig:8dbd9dfa60ef3964b1ee0785a68760af8658048c

My new data in the new request is able to overwrite the waffle parameter because their parser fills in a map without checking if the parameter existed previously.

Notes

Code review red flags included custom crypto looking code. However I am not a crypto expert and it was difficult for me to find the solution to this level.

Level 5 of the Stripe CTF revolved around a design issue in an OpenID like protocol.

Code

    def authenticated?(body)
      body =~ /[^\w]AUTHENTICATED[^\w]*$/
    end

...

      if authenticated?(body)
        session[:auth_user] = username
        session[:auth_host] = host
        return "Remote server responded with: #{body}." \
               " Authenticated as #{username}@#{host}!"

Issue

This level is an implementation of a federated identity protocol. You give it an endpoint URI and a username and password, it posts the username and password to the endpoint URI, and if the response is 'AUTHENTICATED' then access is allowed. It is easy to be authenticated on a server you control, but this level requires you to authenticate from the server running the level. This level only talks to stripe CTF servers so the first step is to upload a document to the level 2 server containing the text 'AUTHENTICATED' and we can now authenticate on a level 2 server. Notice that the level 5 server will dump out the content of the endpoint URI and that the regexp it uses to detect the text 'AUTHENTICATED' can match on that dump. Accordingly I uploaded an authenticated file to

https://level02-2.stripe-ctf.com/user-ajvivlehdt/uploads/authenticated

Using that as my endpoint URI means authenticating as level 2. I can then choose the following endpoint URI to authenticate as level 5.

https://level05-1.stripe-ctf.com/user-qtoyekwrod/?pingback=https%3A%2F%2Flevel02-2.stripe-ctf.com%2Fuser-ajvivlehdt%2Fuploads%2Fauthenticated&username=a&password=a

Navigating to that URI results in the level 5 server telling me I'm authenticated as level 2 and lists the text of the level 2 file 'AUTHENTICATED'. Feeding this back into the level 5 server as my endpoint URI means level 5 seeing 'AUTHENTICATED' coming back from a level 5 URI.

Notes

I didn't see any particular code review red flags, really the issue here is that the regular expression testing for 'AUTHENTICATED' is too permisive and the protocol itself doesn't do enough. The protocol requires only a set piece of common literal text to be returned which makes it easy for a server to accidentally fall into authenticating. Having the endpoint URI have to return variable text based on the input would make it much harder for a server to accidentally authenticate.

Level 4 and level 6 of the Stripe CTF had solutions around XSS.

Level 4

Code

> Registered Users 

<%@registered_users.each do |user| %>
<%last_active = user[:last_active].strftime('%H:%M:%S UTC') %>
<%if @trusts_me.include?(user[:username]) %>

• 
<%= user[:username] %>
(password: <%= user[:password] %>, last active <%= last_active %>)


Issue

The level 4 web application lets you transfer karma to another user and in doing so you are also forced to expose your password to that user. The main user page displays a list of users who have transfered karma to you along with their password. The password is not HTML encoded so we can inject HTML into that user's browser. For instance, we could create an account with the following HTML as the password which will result in XSS with that HTML:

This HTML runs script that uses jQuery to post to the transfer URI resulting in a transfer of karma from the attacked user to the attacker user, and also the attacked user's password.

Notes

Code review red flags in this case included lack of encoding when using user controlled content to create HTML content, storing passwords in plain text in the database, and displaying passwords generally. By design the web app shows users passwords which is a very bad idea.

Level 6

Code

...

    def self.safe_insert(table, key_values)
      key_values.each do |key, value|
        # Just in case people try to exfiltrate
        # level07-password-holder's password
        if value.kind_of?(String) &&
            (value.include?('"') || value.include?("'"))
          raise "Value has unsafe characters"
        end
      end

      conn[table].insert(key_values)
    end

Issue

This web app does a much better job than the level 4 app with HTML injection. They use encoding whenever creating HTML using user controlled data, however they don't use encoding when injecting JSON data into script (see post_data initialization above). This JSON data is the last five most recent messages sent on the app so we get to inject script directly. However, the system also ensures that no strings we write contains single or double quotes so we can't get out of the string in the JSON data directly. As it turns out, HTML lets you jump out of a script block using no matter where you are in script. For instance, in the middle of a value in some JSON data we can jump out of script. But we still want to run script, so we can jump right back in. So the frame so far for the message we're going to post is the following:

Stripe's web security CTF's level 0 and level 3 had SQL injection solutions described below.

Level 0

Code

app.get('/*', function(req, res) {
  var namespace = req.param('namespace');

  if (namespace) {
    var query = 'SELECT * FROM secrets WHERE key LIKE ? || ".%"';
    db.all(query, namespace, function(err, secrets) {

Issue

There's no input validation on the namespace parameter and it is injected into the SQL query with no encoding applied. This means you can use the '%' character as the namespace which is the wildcard character matching all secrets.

Notes

Code review red flag was using strings to query the database. Additional levels made this harder to exploit by using an API with objects to construct a query rather than strings and by running a query that only returned a single row, only ran a single command, and didn't just dump out the results of the query to the caller.

Level 3

Code

@app.route('/login', methods=['POST'])
def login():
    username = flask.request.form.get('username')
    password = flask.request.form.get('password')

    if not username:
        return "Must provide username\n"

    if not password:
        return "Must provide password\n"

    conn = sqlite3.connect(os.path.join(data_dir, 'users.db'))
    cursor = conn.cursor()

    query = """SELECT id, password_hash, salt FROM users
               WHERE username = '{0}' LIMIT 1""".format(username)
    cursor.execute(query)

    res = cursor.fetchone()
    if not res:
        return "There's no such user {0}!\n".format(username)
    user_id, password_hash, salt = res

    calculated_hash = hashlib.sha256(password + salt)
    if calculated_hash.hexdigest() != password_hash:
        return "That's not the password for {0}!\n".format(username)

Issue

There's little input validation on username before it is used to constrcut a SQL query. There's no encoding applied when constructing the SQL query string which is used to, given a username, produce the hashed password and the associated salt. Accordingly one can make username a part of a SQL query command which ensures the original select returns nothing and provide a new SELECT via a UNION that returns some literal values for the hash and salt. For instance the following in blue is the query template and the red is the username injected SQL code:

SELECT id, password_hash, salt FROM users WHERE username = 'doesntexist' UNION SELECT id, ('5e884898da28047151d0e56f8dc6292773603d0d6aabbdd62a11ef721d1542d8') AS password_hash, ('word') AS salt FROM users WHERE username = 'bob' LIMIT 1

In the above I've supplied my own salt and hash such that my salt (word) plus my password (pass) hashed produce the hash I provided above. Accordingly, by providing the above long and interesting looking username and password as 'pass' I can login as any user.

Notes

Code review red flag is again using strings to query the database. Although this level was made more difficult by using an API that returns only a single row and by using the execute method which only runs one command. I was forced to (as a SQL noob) learn the syntax of SELECT in order to figure out UNION and how to return my own literal values.

Use of my old Hotmail account has really snuck up on me as I end up caring more and more about all of the services with which it is associated. The last straw is Windows 8 login, but previous straws include Xbox, Zune, SkyDrive, and my Windows 7 Phone. I like the features and sync'ing associated with the Windows Live ID, but I don't like my old, spam filled, hotmail email address on the Live ID account.

A coworker told me about creating a Live ID from a custom domain, which sounded like just the ticket for me. Following the instructions above I was able to create a new deletethis.net Live ID but the next step of actually using this new Live ID was much more difficult. My first hope was there would be some way to link my new and old Live IDs so as to make them interchangeable. As it turns out there is a way to link Live IDs but all that does is make it easy to switch between accounts on Live Mail, SkyDrive and some other webpages.

Instead one must change over each service or start over depending on the service:

Xbox

In the Xbox 360 system menu you can change the Live ID associated with your gamertag. This worked fine for me and I got an email telling me about the transfer of my Microsoft Points.

Zune

There's no way to do this for the Zune specifically, however changing over your Xbox account also transfers over all your Zune purchased content. I don't have a Zune Pass so I can't confirm that, but all of my previously purchased television shows transferred over successfully.

Windows 7 Phone

To change the main Live ID associated with your phone, reset your phone to factory default and start over. All purchased applications are lost. Had I purchased any applications I would have been pissed, but instead I was just irritated that I had to reset my phone.

Mail

I don't use my Hotmail account for anything and it only sits and collects spam. Accordingly I didn't attempt switching this over.

SkyDrive

I didn't have much in my SkyDrive account. I downloaded all files as a zip and then manually uploaded them to the new account.

As a professional URI aficionado I deal with various levels of ignorance on URI percent-encoding (aka URI encoding, or URL escaping).

Worse than the lame blog comments hating on percent-encoding is the shipping code which can do actual damage. In one very large project I won't name, I've fixed code that decodes all percent-encoded octets in a URI in order to get rid of pesky percents before calling ShellExecute. An unnamed developer with similar intent but clearly much craftier did the same thing in a loop until the string's length stopped changing. As it turns out percent-encoding serves a purpose and can't just be removed arbitrarily.

Percent-encoding exists so that one can represent data in a URI that would otherwise not be allowed or would be interpretted as a delimiter instead of data. For example, the space character (U+0020) is not allowed in a URI and so must be percent-encoded in order to appear in a URI:

1. http://example.com/the%20path/
2. http://example.com/the path/

In the above the first is a valid URI while the second is not valid since a space appears directly in the URI. Depending on the context and the code through which the wannabe URI is run one may get unexpected failure.

For an additional example, the question mark delimits the path from the query. If one wanted the question mark to appear as part of the path rather than delimit the path from the query, it must be percent-encoded:

1. http://example.com/foo%3Fbar
2. http://example.com/foo?bar

In the second, the question mark appears plainly and so delimits the path "/foo" from the query "bar". And in the first, the querstion mark is percent-encoded and so the path is "/foo%3Fbar".