read page 5 - Dave's Blog

Last time I wrote about how I switched from Delicious to Google Reader's shared links feature only to find out that week that Google was removing the Google Reader shared links feature in favor of Google Plus social features (I'll save my Google Plus rant for another day).

Forced to find something new again, I'm now very pleased with Tumblr. Google Reader has Tumblr in its preset list of Send To sites which makes it relatively easy to add articles. And Tumblr's UX for adding things lets me easily pick a photo or video to display from the article - something which I had put together with a less convenient UX on my bespoke blogging system. For adding things outside of Google Reader I made a Tumblr accelerator to hookup to the Tumblr Add UX.

Of course they have an RSS feed which I hooked up to my blog. The only issue I had there is that when you add a link (and not a video or photo) to Tumblr, the RSS feed entry title for that link is repeated in the entry description as a link followed by a colon and then the actual description entered into Tumblr. I want my title separate so I can apply my own markup so I did a bit of parsing of the description to remove the repeated title from the description.

I had previously replaced my use of Delicious with Google Reader. Delicious had a number of issues during their switch over from Yahoo to the new owners and I was eventually fed up enough to remove it from daily use. I used Delicious to do the following things:

• Create a list of things to read later
• Save things to read again in the future
• Search through things I read and enjoyed (esp via tags)
• Annotate and share things on my blog

I realized that since I did most of my web browsing in Google Reader now anyway I may as well make use of its features. I star things to note I want to read it later or save to read again later. I can annotate with notes in Google Reader and I can share items to my web site by way of the shared items feed. Additionally for when I'm not in Google Reader there's a bookmarklet to add an arbitrary web site as a shared item in Google Reader.

Of course I wrote this and switched over about 1 week before Google removed the sharing feature from Google Reader. I'm irritated but in practice it forced me to find a different option which has worked out mostly better. New blog post coming soon about that...

The following code works fine. I have a ccomptr named resolvedUri and I want to update its hostname so I do the following:

        CreateIUriBuilder(resolvedUri, 0, 0, &builder);
        builder->SetHost(host);
        builder->CreateUri(0xFFFFFFFF, 0, 0, &resolvedUri);

But the following similar looking code has a bug:

    ResolveHost(resolvedUri, &resolvedUri);

The issue is that doing &resolvedUri gets the address of the pointer but also clears out the pointer due to the definition of my smart pointer class:

    operator T**()  
    {  
        T *ptrValue = mPtrValue;
        mPtrValue->Release();
        mPtrValue = NULL;
        return &ptrValue;
    }

In C++ there’s no guarantee about the order in which parameters for a function or method are evaluated. In the case above, &resolvedUri clears out the ccomptr before evaluating resolvedUri.Get() and so ResolveHostAlias gets a nullptr.

An interesting and related thread on stack overflow on undefined behavior in C++.

I haven't been updating my blog recently. But I have three excellent reasons:

• The manner in which I use Delicious is broken.
• I've been playing Glitch instead of reading through Google Reader.
• I have a newborn!

I wanted to ensure that my switch statement in my implementation of IInternetSecurityManager::ProcessURLAction had a case for every possible documented URLACTION. I wrote the following short command line sequence to see the list of all URLACTIONs in the SDK header file not found in my source file:

grep URLACTION urlmon.idl | sed 's/.*\(URLACTION[a-zA-Z0-9_]*\).*/\1/g;' | sort | uniq > allURLACTIONs.txt
grep URLACTION MySecurityManager.cpp | sed 's/.*\(URLACTION[a-zA-Z0-9_]*\).*/\1/g;' | sort | uniq > myURLACTIONs.txt
comm -23 allURLACTIONs.txt myURLACTIONs.txt

I'm not a sed expert so I had to read the sed documentation, and I heard about comm from Kris Kowal's blog which happilly was in the Win32 GNU tools pack I already run.

But in my effort to learn and use PowerShell I found the following similar command line:

diff 
(more urlmon.idl | %{ if ($_ -cmatch "URLACTION[a-zA-Z0-9_]*") { $matches[0] } } | sort -uniq) 
(more MySecurityManager.cpp | %{ if ($_ -cmatch "URLACTION[a-zA-Z0-9_]*") { $matches[0] } } | sort -uniq)

In the PowerShell version I can skip the temporary files which is nice. 'diff' is mapped to 'compare-object' which seems similar to comm but with no parameters to filter out the different streams (although this could be done more verbosely with the ?{ } filter syntax). In PowerShell uniq functionality is built into sort. The builtin -cmatch operator (c is for case sensitive) to do regexp is nice plus the side effect of generating the $matches variable with the regexp results.

I used FiddlerCore in GeolocMock to edit HTTPS responses and ran into two stumbling blocks that I'll document here. The first is that I didn't check if the Fiddler root cert existed or was installed, which of course is necessary to edit HTTPS traffic. The following is my code where I check for the certs.

    if (!Fiddler.CertMaker.rootCertExists())
    {
        if (!Fiddler.CertMaker.createRootCert())
        {
            throw new Exception("Unable to create cert for FiddlerCore.");
        }
    }

    if (!Fiddler.CertMaker.rootCertIsTrusted())
    {
        if (!Fiddler.CertMaker.trustRootCert())
        {
            throw new Exception("Unable to install FiddlerCore's cert.");
        }
    }

The second problem I had (which would have been solved had I read all the sample code first) was that my changes weren't being applied. In my app I only need the BeforeResponse but in order to modify the response I must also sign up for the BeforeRequest event and mark the bBufferResponse flag on the session before the response comes back. For example:

    Fiddler.FiddlerApplication.BeforeRequest += new SessionStateHandler(FiddlerApplication_BeforeRequest);
    Fiddler.FiddlerApplication.BeforeResponse += new SessionStateHandler(FiddlerApplication_BeforeResponse);
...
    private void FiddlerApplication_BeforeRequest(Session oSession)
    {
        if (IsInterestingSession(oSession))
        {
            oSession.bBufferResponse = true;
        }
    }

For my GeolocMock weekend project I intended to use the Bing Maps API to display a map in a WebBrowser control and allow the user to interact with that to select a location to be consumed by my application. Getting my .NET code to talk to the JavaScript in the WebBrowser control was surprisingly easy.

To have .NET execute JavaScript code you can use the InvokeScript method passing the name of the JavaScript function to execute and an object array of parameters to pass:

this.webBrowser2.Document.InvokeScript("onLocationStateChanged",
   new object[] {
      latitudeTextBoxText,
      longitudeTextBoxText,
      altitudeTextBoxText,
      uncertaintyTextBoxText
   });

The other direction, having JavaScript call into .NET is slightly more complicated but still pretty easy as far as language interop goes. The first step is to mark your assembly as ComVisible so that it can interact with JavaScript via COM. VS had already added a ComVisible declaration to my project I just had to change the value to true.

[assembly: ComVisible(true)]

Next set ObjectForScripting attribute to the object you want to expose to JavaScript.

this.webBrowser2.ObjectForScripting = this.locationState;

Now that object is exposed as window.external in JavaScript and you can call methods on it.

window.external.Set(lat, long, alt, gUncert);

However you don't seem to be able to test for the existence of methods off of it. For example the following JavaScript generates an exception for me even though I have a Set method:

if (window.external && window.external.Set) {

Working on GeolocMock it took me a bit to realize why my HTML could use the W3C Geolocation API in IE9 but not in my WebBrowser control in my .NET application. Eventually I realized that I was getting the wrong IE doc mode. Reading this old More IE8 Extensibility Improvements IE blog post from the IE blog I found the issue is that for app compat the WebOC picks older doc modes but an app hosting the WebOC can set a regkey to get different doc modes. The IE9 mode isn't listed in that article but I took a guess based on the values there and the decimal value 9999 gets my app IE9 mode. The following is the code I run in my application to set its regkey so that my app can get the IE9 doc mode and use the geolocation API.

        static private void UseIE9DocMode()
        {
            RegistryKey key = null;
            try
            {
                key = Registry.CurrentUser.OpenSubKey("Software\\Microsoft\\Internet Explorer\\Main\\FeatureControl\\FEATURE_BROWSER_EMULATION", true);
            }
            catch (Exception)
            {
                key = Registry.CurrentUser.CreateSubKey("Software\\Microsoft\\Internet Explorer\\Main\\FeatureControl\\FEATURE_BROWSER_EMULATION");
            }
            key.SetValue(System.Diagnostics.Process.GetCurrentProcess().MainModule.ModuleName, 9999, RegistryValueKind.DWord);
            key.Close();
        }