Internet Explorer 8 has made my plugin Feed Folder obselete in functionality and implementation -- which is good!
I made Feed Folder for IE7 because I wanted the Live Bookmarking feature from FireFox. The Feed Folder plugin for IE7 would allow you to display your feeds as virtual folders in your Links Bar. When your feed is updated the virtual folder is updated as well with the new feed items. I use del.icio.us to store all my links so I could add virtual folders of my daily links, my friends blogs links, quick reference links, etc. etc.
My plugin relied on shell folders to implement the virtual folders I described above, but IE8 doesn't support shell folders in the Favorites Bar. But I'm OK with Feed Folder not working in IE8 since there's a much better implementation already there. IE8 does better than my plugin on a number of points: First, there isn't the horrible perf. issue that my plugin had on Vista. Second, when a feed is updated the virtual folder flashes to note the change in status. Third, unread items are bolded and the bolding bubbles up from feeds contained in subfolders. And lastly, the middle click button is supported to open items in a new tab.
Accordingly, I don't plan to work on Feed Folder anymore unless someone comes up with a good reason. Instead I mark Feed Folder deprecated and suggest you use Internet Explorer 8 instead.
To use this feature in IE8 simply drag a feed from your feed list in your Favorites Center onto your Favorites Bar. Or, when viewing a feed, click on the 'Add to Favorites' Star Plus icon thing in the upper left, and select 'Monitor on Favorites Bar'. A .url Internet Shortcut file is produced as usual, but if you open up the .url file you'll see there's some additional info about the feed.
I got a FlickrMail from Emma J. Williams a bit ago saying that they wanted to
use two of my photos in their Schmap San Francisco Guide online travel guide. So now you can see two of my vacation photos on the Westfield San Francisco Shopping Center Schmap page and the Hotel Diva Schmap page.
I think its wonderful that digital cameras are at
the point where I really don't have to know much about their workings to produce a photo that's reasonable looking. And its thanks to Flickr and searchable tags that Schmap could find my photos.
Since my photos on Flickr are all licensed under a Creative Commons license named Attribution-Noncommercial-No Derivative Works
2.0 Generic which only applies to non-commercial uses, Schmap, which is advertisement supported, kindly asked me if they could use my photos. I agreed to their license which was human readable
and included wonderful stuff like I get in place attribution and the license is only applicable while Schmap makes their guide freely available online.
Previously I've only heard of folks having their flickr photos used without their permission so I'm glad to know that's not always the case. Or perhaps this is just Schmap's clever method of getting me to blog about them.
IPv6 address syntax consists of 8 groupings of colon delimited 16-bit hex values making up the 128-bit address. An optional double colon
can replace any consecutive sequence of 0 valued hex values. For example the following is a valid IPv6 address: fe80::2c02:db79
Some IPv6 addresses aren't global and in those cases need a scope ID to describe their context. These get a '%' followed by the scope ID.
For example the previous example with a scope ID of '8' would be: fe80::2c02:db79%8
IPv6 addresses in URIs may appear in the host section of a URI as long as they're enclosed by square brackets. For example:
http://[fe80::2c02:db79]/. The RFC explicitly notes that there isn't a way to add a scope ID to the IPv6 address in a URI. However a draft document describes adding
scope IDs to IPv6 addresses in URIs. The draft document uses the IPvFuture production from the URI RFC with a 'v1' to add a new
hostname syntax and a '+' instead of a '%' for delimiting the scope id. For example: http://[v1.fe80::2c02:db79+8]/. However, this is still a draft document, not a final
standard, and I don't know of any system that works this way.
In Windows XPSP2 the IPv6 stack is available but disabled by default. To enable the IPv6 stack, at a command prompt run 'netsh interface ipv6 install'. In Vista IPv6 is the on by default and cannot be turned off, while the IPv4 stack is optional and may be turned off by a command similar to the previous.
Once you have IPv6 on in your OS you can turn on IPv6 for IIS6 or just use IIS7. The address ::1 refers to the local machine.
In some places in Windows like UNC paths, IPv6 addresses aren't allowed. In those cases you can use a Vista DNS IPv6 hack that lives in the OS
name resolution stack that transforms particularly crafted names into IPv6 addresses. Take your IPv6 address, replace the ':'s with '-'s and the '%' with an 's' and then append '.ipv6-literal.net'
to the end. For example: fe80--2c02-db79s8.ipv6-literal.net. That name will resolve to the same example I've been using in Vista. This transformation occurs inside the system's local
name resolution stack so no DNS servers are involved, although Microsoft does own the ipv6-literal.net domain name.
MSDN describes IPv6 addresses in URIs in Windows and I've described IPv6 addresses in URIs in IE7. File URIs in
IE7 don't support IPv6 addresses. If you want to put a scope ID in a URI in IE7 you use a '%25' to delimit the scope ID and due to a bug you must have at least two digits in your scope ID. So,
to take the previous example: http://[fe80::2c02:db79%2508]/. Note that its 08 rather than just 8.
The new Zune software has podcast support which does everything I'd want to do with a
Win MCE recorded TV series so the goal is to shoehorn a TV series into a Zune podcast. An overview of the steps: Create an XSLT that converts Win MCE data to a podcast, run the XSLT as a scheduled
task every few hours per TV series, setup a Web server pointed at the resulting podcasts and the Win MCE Recorded TV directory, and subscribe to the resulting podcasts in the Zune software.
C:\windows\system32\wscript.exe C:\users\dave\bin\xsltproc.js C:\Users\Dave\Documents\trunk\development\mce-zune\mce-to-podcast.xslt
C:\ProgramData\Microsoft\eHome\Recording\Recordings.xml --param title "The Daily Show With Jon Stewart" --param max 4 --param baseURI "http://groucho/" --param thisRelURI "tds.xml" -o
"D:\recorded tv\tds.xml"
var createNewXMLObj = function() {
var result = new ActiveXObject("MSXML2.FreeThreadedDOMDocument");
result.validateOnParse = false;
result.async = false;
return result;
}
var args = WScript.arguments;
var ofs = WScript.CreateObject("Scripting.FileSystemObject");
var xslParams = [];
var xmlStyle = null;
var xmlInput = null;
var inputFile = null;
var outputFile = null;
var error = false;
for (var idx = 0; idx < args.length && !error; ++idx)
if (args.item(idx) == "-o") {
if (idx + 1 < args.length) {
outputFile = ofs.GetAbsolutePathName(args.item(idx + 1));
++idx;
}
else
error = true;
}
else if (args.item(idx) == "--param" || args.item(idx) == "-param") {
if (idx + 2 < args.length) {
xslParams[args.item(idx + 1)] = args.item(idx + 2);
idx += 2;
}
else
error = true;
}
else if (xmlStyle == null) {
xmlStyle = createNewXMLObj();
xmlStyle.load(ofs.GetAbsolutePathName(args.item(idx)));
}
else if (xmlInput == null) {
inputFile = ofs.GetAbsolutePathName(args.item(idx));
xmlInput = createNewXMLObj();
xmlInput.load(inputFile);
}
if (xmlStyle == null || xmlInput == null || error) {
WScript.Echo('Usage:\n\t"xsltproc" xsl-stylesheet input-file\n\t\t["-o" output-file] *["--param" name value]');
}
else {
var xslt = new ActiveXObject("MSXML2.XSLTemplate.3.0");
xslt.stylesheet = xmlStyle;
var xslProc = xslt.createProcessor();
xslProc.input = xmlInput;
for (var keyVar in xslParams)
xslProc.addParameter(keyVar, xslParams[keyVar]);
xslProc.transform();
if (outputFile == null)
WScript.Echo(xslProc.output);
else {
var xmlOutput = createNewXMLObj();
xmlOutput.loadXML(xslProc.output);
xmlOutput.save(outputFile);
}
}which command is a rather literal port and requires you to enter the entire name of the command for which you're looking. That is 'which which' won't find itself but
'which which.exe' will. This makes this almost useless for me so I thought to write my own as a batch file. I had learned about a few goodies available in cmd.exe that I thought would
make this an easy task. It turned out to be more difficult than I thought.for /F "usebackq tokens=*" %%a in ( `"echo %PATH:;=& echo %"` ) do (
for /F "usebackq tokens=*" %%b in ( `"echo %PATHEXT:;=& echo %"` ) do (
if exist "%%a"\%1%%b (
for %%c in ( "%%a"\%1%%b ) do (
echo %%~fc
)
)
)
)PATH and PATHEXT hold the list of paths to search through to find commands, and the extensions of files that should be run as
commands respectively. The 'for /F "usebackq tokens=*" %%a in (...) do (...)' runs the 'do' portion with %%a sequentially taking on the value of every line in
the 'in' portion. That's nice, but PATH and PATHEXT don't have their elements on different lines and I don't know of a way to escape a newline character to
appear in a batch file. In order to get the PATH and PATHEXT's elements onto different lines I used the %ENV:a=b% syntax which replaces occurrences of a with b
in the value of ENV. I replaced the ';' delimiter with the text '& echo ' which means %PATHEXT:;=& echo% evaluates to something like "echo
.COM& echo .EXE& echo .BAT& ...". I have to put the whole expression in double quotes in order to escape the '&' for appearing in the batch file. The usebackq and
the backwards quotes means that the backquoted string should be replaced with the output of the execution of its content. So in that fashion I'm able to get each element of the env. variable onto new
lines. The rest is pretty straight forward.C:\Users\davris>which.cmd *hi*
C:\Windows\System32\GRAPHICS.COM
C:\Windows\System32\SearchIndexer.exe
D:\bin\which.exe
D:\bin\which.cmd
Some rights reserved
