document page 8 - Dave's Blog

IPv6 Roundup: Address Syntax on Windows

2008 Jan 9, 11:34

IPv6 address syntax consists of 8 groupings of colon delimited 16-bit hex values making up the 128-bit address. An optional double colon can replace any consecutive sequence of 0 valued hex values. For example the following is a valid IPv6 address: fe80::2c02:db79

Some IPv6 addresses aren't global and in those cases need a scope ID to describe their context. These get a '%' followed by the scope ID. For example the previous example with a scope ID of '8' would be: fe80::2c02:db79%8

IPv6 addresses in URIs may appear in the host section of a URI as long as they're enclosed by square brackets. For example: http://[fe80::2c02:db79]/. The RFC explicitly notes that there isn't a way to add a scope ID to the IPv6 address in a URI. However a draft document describes adding scope IDs to IPv6 addresses in URIs. The draft document uses the IPvFuture production from the URI RFC with a 'v1' to add a new hostname syntax and a '+' instead of a '%' for delimiting the scope id. For example: http://[v1.fe80::2c02:db79+8]/. However, this is still a draft document, not a final standard, and I don't know of any system that works this way.

In Windows XPSP2 the IPv6 stack is available but disabled by default. To enable the IPv6 stack, at a command prompt run 'netsh interface ipv6 install'. In Vista IPv6 is the on by default and cannot be turned off, while the IPv4 stack is optional and may be turned off by a command similar to the previous.

Once you have IPv6 on in your OS you can turn on IPv6 for IIS6 or just use IIS7. The address ::1 refers to the local machine.

In some places in Windows like UNC paths, IPv6 addresses aren't allowed. In those cases you can use a Vista DNS IPv6 hack that lives in the OS name resolution stack that transforms particularly crafted names into IPv6 addresses. Take your IPv6 address, replace the ':'s with '-'s and the '%' with an 's' and then append '.ipv6-literal.net' to the end. For example: fe80--2c02-db79s8.ipv6-literal.net. That name will resolve to the same example I've been using in Vista. This transformation occurs inside the system's local name resolution stack so no DNS servers are involved, although Microsoft does own the ipv6-literal.net domain name.

MSDN describes IPv6 addresses in URIs in Windows and I've described IPv6 addresses in URIs in IE7. File URIs in IE7 don't support IPv6 addresses. If you want to put a scope ID in a URI in IE7 you use a '%25' to delimit the scope ID and due to a bug you must have at least two digits in your scope ID. So, to take the previous example: http://[fe80::2c02:db79%2508]/. Note that its 08 rather than just 8.

roundup ip windows ipv6 technical microsoft boring syntax

Theme Options

2007 Dec 24, 12:41These days it seems like there's a social sharing website for everything representable as bits. Like Scribd for (mostly legal) documents, SciVee for scientific research videos, Wordie for words, and Kuler for color themes. Kuler seems like a ridiculous website (overkill) but I had been meaning to update my homepage's color design and Kuler has an RSS based REST API. The API lets you obtain things like the most recently added color themes or the most popular or all themes containing the color dark red, etc... So of course rather than update my website's design I hooked up my css to the color themes coming out of Kuler. Select my main page's color theme from a list of random Kuler themes. As I'm sure the regular readers can guess I use an xslt and blah blah blah... It looks OK with Silver Surfer and Happy Hipo but in general changing the colors this way doesn't produce something pretty.

When reading about Kuler I found that they may have stolen the whole idea wholeslae from ColourLovers. They discuss the thievery in an article on their blog. I would have switched over to ColourLovers out of principle but they don't have an easily accessible API.colourlovers color xslt theme homepage technical kuler design

Windows Media Center and Zune Integration Hack

2007 Nov 28, 1:23One of the new Zune features that had me the most excited was the claimed improved Windows Media Center integration which unfortunately turned out to simply mean support for the Win MCE video format (with an exception for HD). I wanted to be able to pick shows recorded by my Win MCE and have the Zune automatically sync up the latest episodes. However, with the improved podcast support in the Zune software one can easily create a ridiculous hack to accomplish this.

The new Zune software has podcast support which does everything I'd want to do with a Win MCE recorded TV series so the goal is to shoehorn a TV series into a Zune podcast. An overview of the steps: Create an XSLT that converts Win MCE data to a podcast, run the XSLT as a scheduled task every few hours per TV series, setup a Web server pointed at the resulting podcasts and the Win MCE Recorded TV directory, and subscribe to the resulting podcasts in the Zune software.

1. Reading through the Win MCE data stored as an XML file in "C:\ProgramData\Microsoft\eHome\Recording\Recordings.xml" and the spec for podcasts I created an XSLT to convert a series from Win MCE data to a podcast.
2. I added a new task to the Scheduled Tasks to run my XSLT using my xsltproc.js script. The task runs a handful of commands that look something like the following:

   C:\windows\system32\wscript.exe C:\users\dave\bin\xsltproc.js C:\Users\Dave\Documents\trunk\development\mce-zune\mce-to-podcast.xslt C:\ProgramData\Microsoft\eHome\Recording\Recordings.xml --param title "The Daily Show With Jon Stewart" --param max 4 --param baseURI "http://groucho/" --param thisRelURI "tds.xml" -o "D:\recorded tv\tds.xml"

   For each TV series I run a command like the above and that outputs a podcast for that series into my "D:\Recorded TV\" directory.
3. Zune only allows http URIs for its podcasts so I installed a web server on my Win MCE server. I'm running Vista Ultimate so it was quick and easy for me to install IIS7 but any Web server will do. Then I pointed it at "D:\Recorded TV\".
4. Once all the above was done I just subscribed to the resulting podcasts via my Web server and viola! Since I'm forced to use a Web server I can even run the Zune software on a machine other than my Win MCE server. You can see a screen-shot above of my Zune software showing my Colbert Report podcast.

technical xml mce hack windows media center zune windows xslt podcast

Vishu and Patent Cube

2007 Nov 28, 5:07Vishu, my ex-office-mate, has left Washington and Microsoft for California and Facebook. Vishu and I shared an office for a while and I really enjoyed it. We were able to distract one another from, and help each other with work. We'd often bounce ideas off of one another, work related or otherwise. For one such idea I recently received a Microsoft patent cube, a small marble cube inscribed with my and my invention's name. There are some photos of other people's patent cubes on flickr. Vishu would have received one for this idea too since we developed the idea and wrote the document about it together, but they wait a long time to send you the cube and he was gone a few weeks before they sent it (don't worry, he got the credit and other rewards though).

A week or two after I got my cube Vishu was visiting the Microsoft campus just before moving his family down with him to California. A bunch of us joined him for lunch that day and it sounds like he's enjoying his new job already. Have fun Vishu!microsoft facebook vishu cube patent nontechnical

XSL Transforms in JavaScript

2007 Oct 7, 4:12In a previous post I mentioned an xsltproc like js file I made. As noted in that post, on Windows you can write console script files in JavaScript, name them foo.js, and execute them from the command prompt. I later found that MSDN has an XSLT javascript sample which looks similar to mine, but I like mine better for the XSLT parameter support and having a non-ridiculous way of interpreting filenames. The code for my xsltproc.js follows. The script is very simple and demonstrates the ease with which you can manipulate these system objects and all it takes is opening up notepad.

var createNewXMLObj = function() {
   var result = new ActiveXObject("MSXML2.FreeThreadedDOMDocument");
   result.validateOnParse = false;
   result.async = false;
   return result;
}

var args = WScript.arguments;
var ofs = WScript.CreateObject("Scripting.FileSystemObject");

var xslParams = [];
var xmlStyle = null;
var xmlInput = null;
var inputFile = null;
var outputFile = null;
var error = false;

for (var idx = 0; idx < args.length && !error; ++idx)
   if (args.item(idx) == "-o") {
      if (idx + 1 < args.length) {
         outputFile = ofs.GetAbsolutePathName(args.item(idx + 1));
         ++idx;
      }
      else
         error = true;
   }
   else if (args.item(idx) == "--param" || args.item(idx) == "-param") {
      if (idx + 2 < args.length) {
         xslParams[args.item(idx + 1)] = args.item(idx + 2);
         idx += 2;
      }
      else
         error = true;
   }
   else if (xmlStyle == null) {
      xmlStyle = createNewXMLObj();
      xmlStyle.load(ofs.GetAbsolutePathName(args.item(idx)));
   }
   else if (xmlInput == null) {
      inputFile = ofs.GetAbsolutePathName(args.item(idx));
      xmlInput = createNewXMLObj();
      xmlInput.load(inputFile);
   }

if (xmlStyle == null || xmlInput == null || error) {
   WScript.Echo('Usage:\n\t"xsltproc" xsl-stylesheet input-file\n\t\t["-o" output-file] *["--param" name value]');
}
else {
   var xslt = new ActiveXObject("MSXML2.XSLTemplate.3.0");
   xslt.stylesheet = xmlStyle;
   var xslProc = xslt.createProcessor();
   xslProc.input = xmlInput;

   for (var keyVar in xslParams)
      xslProc.addParameter(keyVar, xslParams[keyVar]);

   xslProc.transform();

   if (outputFile == null)
      WScript.Echo(xslProc.output);
   else {
      var xmlOutput = createNewXMLObj();
      xmlOutput.loadXML(xslProc.output);
      xmlOutput.save(outputFile);
   }
}

js xml jscript windows xslt technical xsltproc wscript xsl javascript

Date Time Formats

2007 Sep 27, 2:17Starting on a new simple project I wanted to get the history of my Delicious links. Delicious has an export tool available via the settings section so I thought I'd try that. However, the links aren't exported in XML not even in XHTML but rather in HTML. Shocking. An example:

"Don't Tase Me, Bro!" (UF Student Tasered Remix)

Remix of the 'Don't tase me, bro!' guy getting tasered.At this point I'm already not going to use this file because its in HTML but I'm even more disgusted by those date time values. Raymond Chen of the Old New Thing posted about recognizing timestamps and timestamp sentinel values. From the first blog post and with the use of a calculator for base conversion one can tell that those are UNIX style timestamps counting the number of seconds since 1970.

It reminds me of my hatred for the MIME date time format I developed working on my webpage's server side parsing of atom and RSS. Atom is of course my favorite as Atom uses the Internet date time format described in the following documents. Here's an example of one 2007-09-27T020:50:00.000-08:00

• W3C Recommended Date and Time Format
• IETF: Date and Time on the Internet: Timestamps
• XML Schema dateTime

On the other hand the evil and villainous RSS uses the MIME date time format now described in the more recent IETF MIME standard. Here's an example Thu, 27 Sep 2007 20:50:00 -0800
The Internet date time format has the advantage of being so easy to sort. An alphabetic sort with normal C-style collation rules of strings containing Internet date times will also sort them chronologically. This is not the case for the MIME date time due to the preceding day of the week and the spelled out month name. This also means that when producing these you have to figure out the day of the week and when parsing them you have to match month names rather than just parsing out numbers. Anyway now days if I see mention of a date time in a new proposed standard or spec I be sure to point out the numerous advantages of the Internet date time format.

date xml html feed time technical date-time code atom rss