ace - Dave's Blog

There are two main differences in terms of security between a JavaScript UWP app and the Edge browser:

Process Model

A JavaScript UWP app has one process (technically not true with background tasks and other edge cases but ignoring that for the moment) that runs in the corresponding appcontainer defined by the app's appx manifest. This one process is where edgehtml is loaded and is rendering HTML, talking to the network, and executing script. Specifically, the UWP main UI thread is the one where your script is running and calling into WinRT.

In the Edge browser there is a browser process running in the same appcontainer defined by its appx manifest, but there are also tab processes. These tab processes are running in restricted app containers that have fewer appx capabilities. The browser process has XAML loaded and coordinates between tabs and handles some (non-WinRT) brokering from the tab processes. The tab processes load edgehtml and that is where they render HTML, talk to the network and execute script.

There is no way to configure the JavaScript UWP app's process model but using WebViews you can approximate it. You can create out of process WebViews and to some extent configure their capabilities, although not to the same extent as the browser. The WebView processes in this case are similar to the browser's tab processes. See the MSWebViewProcess object for configuring out of process WebView creation. I also implemented out of proc WebView tabs in my JSBrowser fork.

ApplicationContentUriRules

The ApplicationContentUriRules (ACUR) section of the appx manifest lets an application define what URIs are considered app code. See a previous post for the list of ACUR effects.

Notably app code is able to access WinRT APIs. Because of this, DOM security restrictions are loosended to match what is possible with WinRT.

Privileged DOM APIs like geolocation, camera, mic etc require a user prompt in the browser before use. App code does not show the same browser prompt. There still may be an OS prompt – the same prompt that applies to any UWP app, but that’s usually per app not per origin.

App code also gets to use XMLHttpRequest or fetch to access cross origin content. Because UWP apps have separate state, cross origin here might not mean much to an attacker unless your app also has the user login to Facebook or some other interesting cross origin target.

The GoBack and GoForward methods on the UWP WebView (x-ms-webview in HTML, Windows.UI.Xaml.Controls.WebView in XAML, and Windows.Web.UI.Interop.WebViewControl in Win32) act the same as the Back and Forward buttons in the Edge browser. They don't necessarily change the top level document of the WebView. If inside the webview an iframe navigates then that navigation will be recorded in the forward/back history and the GoBack / GoForward call may result in navigating that iframe. This makes sense as an end user using the Edge browser since if I click a link to navigate one place and then hit Back I expect to sort of undo that most recent navigation regardless of if that navigation happened in an iframe or the top level document.

If that doesn't make sense for your application and you want to navigate forward or back ignoring iframe navigates, unfortunately there's no perfect workaround.

One workaround could be to try calling GoBack and then checking if a FrameNavigationStarting event fires or a NavigationStarting event fires. If a frame navigates then try calling GoBack again. There could be async races in this case since other navigates could come in and send you the wrong signal and interrupt your multi step GoBack operation.

You could also try keeping track of all top level document navigations and manually navigate back to the URIs you care about. However, GoBack and GoForward also restore some amount of user state (form fills etc) in addition to navigating. Manually calling navigate will not give this same behavior.

JSBrowser is a basic browser built as a Win10 JavaScript UWP app around the WebView HTML element. Its fun and relatively simple to implement tiny browser features in JavaScript and in this post I'm implementing crash resistance.

The normal DOM mechanisms for creating an HTML WebView create an in-process WebView, in which the WebView runs on a unique UI thread. But we can use the MSWebView constructor instead to create an out-of-process WebView in which the WebView runs in its own distinct WebView process. Unlike an in-process WebView, Web content running in an out-of-process WebView can only crash the WebView process and not the app process.

        this.replaceWebView = () => {
            let webview = document.querySelector("#WebView");
            // Cannot access webview.src - anything that would need to communicate with the webview process may fail
            let oldSrc = browser.currentUrl;
            const webviewParent = webview.parentElement;
            webviewParent.removeChild(webview);
            webview = new MSWebView();
            Object.assign(this, {
                "webview": webview
            });
            webview.setAttribute("id", "WebView");

            // During startup our currentUrl field is blank. If the WebView has crashed 
            // and we were on a URI then we may obtain it from this property.
            if (browser.currentUrl && browser.currentUrl != "") {
                this.trigger("newWebview");
                this.navigateTo(browser.currentUrl);
            }
            webviewParent.appendChild(webview);

I run replaceWebView during startup to replace the in-process WebView created via HTML markup with an out-of-process WebView. I could be doing more to dynamically copy styles, attributes, etc but I know what I need to set on the WebView and just do that.

When a WebView process crashes the corresponding WebView object is no longer useful and a new WebView element must be created. In fact if the old WebView object is used it may throw and will no longer have valid state. Accordingly when the WebView crashes I run replaceWebView again. Additionally, I need to store the last URI we've navigated to (browser.currentUrl in the above) since the crashed WebView object won't know what URI it is on after it crashes.

            webview.addEventListener("MSWebViewProcessExited", () => { 
                if (browser.currentUrl === browser.lastCrashUrl) {                   ++browser.lastCrashUrlCrashCount; 
                } 
                else { 
                    browser.lastCrashUrl = browser.currentUrl; 
                    browser.lastCrashUrlCrashCount = 1; 
                } 
                // If we crash again and again on the same URI, maybe stop trying to load that URI. 
                if (browser.lastCrashUrlCrashCount >= 3) { 
                    browser.lastCrashUrl = ""; 
                    browser.lastCrashUrlCrashCount = 0; 
                    browser.currentUrl = browser.startPage; 
                } 
                this.replaceWebView(); 
            }); 

I also keep track of the last URI that we recovered and how many times we've recovered that same URI. If the same URI crashes more than 3 times in a row then I assume that it will keep happening and I navigate to the start URI instead.

JSBrowser is a basic browser built as a Win10 JavaScript UWP app around the WebView HTML element. Its fun and relatively simple to implement tiny browser features in JavaScript and in this post I'm implementing zoom.

My plan to implement zoom is to add a zoom slider to the settings div that controls the scale of the WebView element via CSS transform. My resulting zoom change is in git and you can try the whole thing out in my JSBrowser fork.

Slider

I can implement the zoom settings slider as a range type input HTML element. This conveniently provides me a min, max, and step property and suits exactly my purposes. I chose some values that I thought would be reasonable so the browser can scale between half to 3x by increments of one quarter. This is a tiny browser feature after all so there's no custom zoom entry.

<a><label for="webviewZoom">Zoom</label><input type="range" min="50" max="300" step="25" value="100" id="webviewZoom" /></a>

To let the user know this slider is for controlling zoom, I make a label HTML element that says Zoom. The label HTML element has a for attribute which takes the id of another HTML element. This lets the browser know what the label is labelling and lets the browser do things like when the label is clicked to put focus on the slider.

Scale

There are no explicit scale APIs for WebView so to change the size of the content in the WebView we use CSS.

        this.applyWebviewZoom = state => {
            const minValue = this.webviewZoom.getAttribute("min");
            const maxValue = this.webviewZoom.getAttribute("max");
            const scaleValue = Math.max(Math.min(parseInt(this.webviewZoom.value, 10), maxValue), minValue) / 100;

            // Use setAttribute so they all change together to avoid weird visual glitches
            this.webview.setAttribute("style", [
                ["width", (100 / scaleValue) + "%"],
                ["height", "calc(" + (-40 / scaleValue) + "px + " + (100 / scaleValue) + "%)"],
                ["transform", "scale(" + scaleValue + ")"]
            ].map(pair => pair[0] + ": " + pair[1]).join("; "));
        };

Because the user changes the scale at runtime I accordingly replace the static CSS for the WebView element with the script above to programmatically modify the style of the WebView. I change the style with one setAttribute call to do my best to avoid the browser performing unnecessary work or displaying the WebView in an intermediate and incomplete state. Applying the scale to the element is as simple as adding 'transform: scale(X)' but then there are two interesting problems.

The first is that the size of the WebView is also scaled not just the content within it. To keep the WebView the same effective size so that it still fits properly into our browser UI, we must compensate for the scale in the WebView width and height. Accordingly, you can see that we scale up by scaleValue and then in width and height we divide by the scaleValue.

transform-origin: 0% 0%;

The other issue is that by default the scale transform's origin is the center of the WebView element. This means when scaled up all sides of the WebView would expand out. But when modifying the width and height those apply relative to the upper left of the element so our inverse scale application to the width and height above aren't quite enough. We also have to change the origin of the scale transform to match the origin of the changes to the width and height.

The documentation for printing in JavaScript UWP apps is out of date as it all references MSApp.getHtmlPrintDocumentSource but that method has been replaced by MSApp.getHtmlPrintDocumentSourceAsync since WinPhone 8.1.

Background

Previous to WinPhone 8.1 the WebView's HTML content ran on the UI thread of the app. This is troublesome for rendering arbitrary web content since in the extreme case the JavaScript of some arbitrary web page might just sit in a loop and never return control to your app's UI. With WinPhone 8.1 we added off thread WebView in which the WebView runs HTML content on a separate UI thread.

Off thread WebView required changing our MSApp.getHtmlPrintDocumentSource API which could no longer synchronously produce an HtmlPrintDocumentSource. With WebViews running on their own threads it may take some time for them to generate their print content for the HtmlPrintDocumentSource and we don't want to hang the app's UI thread in the interim. So the MSApp.getHtmlPrintDocumentSource API was replaced with MSApp.getHtmlPrintDocumentSourceAsync which returns a promise the resolved value of which is the eventual HtmlPrintDocumentSource.

Sample

However, the usage of the API is otherwise unchanged. So in sample code you see referencing MSApp.getHtmlPrintDocumentSource the sample code is still reasonable but you need to call MSApp.getHtmlPrintDocumentSourceAsync instead and wait for the promise to complete. For example the PrintManager docs has an example implementing a PrintTaskRequested event handler in a JavaScript UWP app.

    function onPrintTaskRequested(printEvent) {    
        var printTask = printEvent.request.createPrintTask("Print Sample", function (args) {
            args.setSource(MSApp.getHtmlPrintDocumentSource(document));
    });

Instead we need to obtain a deferral in the event handler so we can asynchronously wait for getHtmlPrintDocumentSourceAsync to complete:

    function onPrintTaskRequested(printEvent) {    
        var printTask = printEvent.request.createPrintTask("Print Sample", function (args) {
            const deferral = args.getDeferral();
            MSApp.getHtmlPrintDocumentSourceAsync(document).then(htmlPrintDocumentSource => {
                args.setSource(htmlPrintDocumentSource);
                deferral.complete();
            }, error => {
                console.error("Error: " + error.message + " " + error.stack);
                deferral.complete();
            });
        });

The x-ms-webview HTML element has the void addWebAllowedObject(string name, any value) method and the webview XAML element has the void AddWebAllowedObject(String name, Object value) method. The object parameter is projected into the webview’s top-level HTML document’s script engine as a new property on the global object with property name set to the name parameter. It is not injected into the current document but rather it is projected during initialization of the next top-level HTML document to which the webview navigates.

Lifetime

If AddWebAllowedObject is called during a NavigationStarting event handler the object will be injected into the document resulting from the navigation corresponding to that event.

If AddWebAllowedObject is called outside of the NavigationStarting event handler it will apply to the navigation corresponding to the next explicit navigate method called on the webview or the navigation corresponding to the next NavigationStarting event handler that fires, whichever comes first.

To avoid this potential race, you should use AddWebAllowedObject in one of two ways: 1. During a NavigationStarting event handler, 2. Before calling a Navigate method and without returning to the main loop.

If called both before calling a navigate method and in the NavigationStarting event handler then the result is the aggregate of all those calls.

If called multiple times for the same document with the same name the last call wins and the previous are silently ignored.

If AddWebAllowedObject is called for a navigation and that navigation fails or redirects to a different URI, the AddWebAllowedObject call is silently ignored.

After successfully adding an object to a document, the object will no longer be projected once a navigation to a new document occurs.

WinRT access

If AddWebAllowedObject is called for a document with All WinRT access then projection will succeed and the object will be added.

If AddWebAllowedObject is called for a document which has a URI which has no declared WinRT access via ApplicationContentUriRules then Allow for web only WinRT access is given to that document.

If the document has Allow for web only WinRT access then projection will succeed only if the object’s runtimeclass has the Windows.Foundation.Metadata.AllowForWeb metadata attribute.

Object requirements

The object must implement the IAgileObject interface. Because the XAML and HTML webview elements run on ASTA view threads and the webview’s content’s JavaScript thread runs on another ASTA thread a developer should not create their non-agile runtimeclass on the view thread. To encourage end developers to do this correctly we require the object implements IAgileObject.

Property name

The name parameter must be a valid JavaScript property name, otherwise the call will fail silently. If the name is already a property name on the global object, that property is overwritten if the property is configurable. Non-configurable properties on the global object are not overwritten and the AddWebAllowedObject call fails silently. On success, the projected property is writable, configurable, and enumerable.

Errors

Some errors as described above fail silently. Other issues, such as lack of IAgileObject or lack of the AllowForWeb attribute result in an error in the JavaScript developer console.

Application Content URI Rules (ACUR from now on) defines the bounds of the web that make up the Microsoft Store application. Package content via the ms-appx URI scheme is automatically considered part of the app. But if you have content on the web via http or https you can use ACUR to declare to Windows that those URIs are also part of your application. When your app navigates to URIs on the web those URIs will be matched against the ACUR to determine if they are part of your app or not. The documentation for how matching is done on the wildcard URIs in the ACUR Rule elements is not very helpful on MSDN so here are some notes.

Rules

You can have up to 100 Rule XML elements per ApplicationContentUriRules element. Each has a Match attribute that can be up to 2084 characters long. The content of the Match attribute is parsed with CreateUri and when matching against URIs on the web additional wildcard processing is performed. I’ll call the URI from the ACUR Rule the rule URI and the URI we compare it to found during app navigation the navigation URI.

The rule URI is matched to a navigation URI by URI component: scheme, username, password, host, port, path, query, and fragment. If a component does not exist on the rule URI then it matches any value of that component in the navigation URI. For example, a rule URI with no fragment will match a navigation URI with no fragment, with an empty string fragment, or a fragment with any value in it.

Asterisk

Each component except the port may have up to 8 asterisks. Two asterisks in a row counts as an escape and will match 1 literal asterisk. For scheme, username, password, query and fragment the asterisk matches whatever it can within the component.

Host

For the host, if the host consists of exactly one single asterisk then it matches anything. Otherwise an asterisk in a host only matches within its domain name label. For example, http://*.example.com will match http://a.example.com/ but not http://b.a.example.com/ or http://example.com/. And http://*/ will match http://example.com, http://a.example.com/, and http://b.a.example.com/. However the Store places restrictions on submitting apps that use the http://* rule or rules with an asterisk in the second effective domain name label. For example, http://*.com is also restricted for Store submission.

Path

For the path, an asterisk matches within the path segment. For example, http://example.com/a/*/c will match http://example.com/a/b/c and http://example.com/a//c but not http://example.com/a/b/b/c or http://example.com/a/c

Additionally for the path, if the path ends with a slash then it matches any path that starts with that same path. For example, http://example.com/a/ will match http://example.com/a/b and http://example.com/a/b/c/d/e/, but not http://example.com/b/.

If the path doesn’t end with a slash then there is no suffix matching performed. For example, http://example.com/a will match only http://example.com/a and no URIs with a different path.

As a part of parsing the rule URI and the navigation URI, CreateUri will perform URI normalization and so the hostname and scheme will be made lower case (casing matters in all other parts of the URI and case sensitive comparisons will be performed), IDN normalization will be performed, ‘.’ and ‘..’ path segments will be resolved and other normalizations as described in the CreateUri documentation.

Parsing WinMD files, the containers of WinRT API metadata, is relatively simple using the appropriate .NET reflection APIs. However, figuring out which reflection APIs to use is not obvious. I've got a completed C sharp class parsing WinMD files that you can check out for reference.

Use System.Reflection.Assembly.ReflectionOnlyLoad to load the WinMD file. Don't use the normal load methods because the WinMD files contain only metadata. This will load up info about APIs defined in that WinMD, but any references to types outside of that WinMD including types found in the normal OS system WinMD files must be resolved by the app code via the System.Reflection.InteropServices.WindowsRuntimeMetadata.ReflectionOnlyNamespaceResolve event.

In this event handler you must resolve the unknown namespace reference by adding an assembly to the NamespaceResolveEventArgs's ResolvedAssemblies property. If you're only interested in OS system WinMD files you can use System.Reflection.InteropServices.WindowsRuntimeMetadata.ResolveNamespace to turn a namespace into the expected OS system WinMD path and turn that path into an assembly with ReflectionOnlyLoad.

The other day I had to debug a JavaScript UWA that was failing when trying to use an undefined property. In a previous OS build this code would run and the property was defined. I wanted something similar to windbg/cdb's ba command that lets me set a breakpoint on read or writes to a memory location so I could see what was creating the object in the previous OS build and what that code was doing now in the current OS build. I couldn't find such a breakpoint mechanism in Visual Studio or F12 so I wrote a little script to approximate JavaScript data breakpoints.

The script creates a stub object with a getter and setter. It actually performs the get or set but also calls debugger; to break in the debugger. In order to handle my case of needing to break when window.object1.object2 was created or accessed, I further had it recursively set up such stub objects for the matching property names.

Its not perfect because it is an enumerable property and shows up in hasOwnProperty and likely other places. But for your average code that checks for the existence of a property via if (object.property) it works well.

I've made a PowerShell script to show system toast notifications with WinRT and PowerShell. Along the way I learned several interesting things.

First off calling WinRT from PowerShell involves a strange syntax. If you want to use a class you write [-Class-,-Namespace-,ContentType=WindowsRuntime] first to tell PowerShell about the type. For example here I create a ToastNotification object:

[void][Windows.UI.Notifications.ToastNotification,Windows.UI.Notifications,ContentType=WindowsRuntime];
$toast = New-Object Windows.UI.Notifications.ToastNotification -ArgumentList $xml;

And here I call the static method CreateToastNotifier on the ToastNotificationManager class:

[void][Windows.UI.Notifications.ToastNotificationManager,Windows.UI.Notifications,ContentType=WindowsRuntime];
$notifier = [Windows.UI.Notifications.ToastNotificationManager]::CreateToastNotifier($AppUserModelId);

With this I can call WinRT methods and this is enough to show a toast but to handle the click requires a little more work.

To handle the user clicking on the toast I need to listen to the Activated event on the Toast object. However Register-ObjectEvent doesn't handle WinRT events. To work around this I created a .NET event wrapper class to turn the WinRT event into a .NET event that Register-ObjectEvent can handle. This is based on Keith Hill's blog post on calling WinRT async methods in PowerShell. With the event wrapper class I can run the following to subscribe to the event:

function WrapToastEvent {
    param($target, $eventName);

    Add-Type -Path (Join-Path $myPath "PoshWinRT.dll")
    $wrapper = new-object "PoshWinRT.EventWrapper[Windows.UI.Notifications.ToastNotification,System.Object]";
    $wrapper.Register($target, $eventName);
}

[void](Register-ObjectEvent -InputObject (WrapToastEvent $toast "Activated") -EventName FireEvent -Action { 
    ...
});

To handle the Activated event I want to put focus back on the PowerShell window that created the toast. To do this I need to call the Win32 function SetForegroundWindow. Doing so from PowerShell is surprisingly easy. First you must tell PowerShell about the function:

Add-Type @"
    using System;
    using System.Runtime.InteropServices;
    public class PInvoke {
        [DllImport("user32.dll")] [return: MarshalAs(UnmanagedType.Bool)]
        public static extern bool SetForegroundWindow(IntPtr hwnd);
    }
"@

Then to call:

[PInvoke]::SetForegroundWindow((Get-Process -id $myWindowPid).MainWindowHandle);

But figuring out the HWND to give to SetForegroundWindow isn't totally straight forward. Get-Process exposes a MainWindowHandle property but if you start a cmd.exe prompt and then run PowerShell inside of that, the PowerShell process has 0 for its MainWindowHandle property. We must follow up process parents until we find one with a MainWindowHandle:

$myWindowPid = $pid;
while ($myWindowPid -gt 0 -and (Get-Process -id $myWindowPid).MainWindowHandle -eq 0) {
    $myWindowPid = (gwmi Win32_Process -filter "processid = $($myWindowPid)" | select ParentProcessId).ParentProcessId;
}