There's no perfect way to change the user agent string for the UWP WebView (x-ms-webview in HTML, Windows.UI.Xaml.Controls.WebView in XAML, and Windows.Web.UI.Interop.WebViewControl in Win32) but there are two imperfect methods folks end up using.

The first is to call UrlMkSetSessionOption. This is an old public API that allows you to configure various arcane options including one that is the default user agent string for requests running through urlmon. This API is allowed by the Microsoft Store for UWP apps. The change it applies is process wide which has two potential drawbacks. If you want to be able to have different UA strings set for different requests from a WebView that's not really possible with this solution. The other drawback is if you're using out of process WebView, you need to ensure you're calling into UrlMkSetSessionOption in the WebView's process. You'll need to write third party WinRT that calls UrlMkSetSessionOption, create the out of proc WebView, navigate it to some trusted local page, use AddWebAllowedObject or provide that URI WinRT access, and call into your third party WinRT. You'll need to do that for any new WebView process you create.

The second less generally applicable solution is to use NavigateWithHttpRequestMessage and set the User-Agent HTTP header. In this case you get to control the scope of the user agent string changes but has the limitations that not all sub resource downloads will use this user agent string and for navigations you don't initiate you have to manually intercept and re-request being careful to transfer over all POST body state and HTTP headers correctly. That last part is not actually possible for iframes.

The GoBack and GoForward methods on the UWP WebView (x-ms-webview in HTML, Windows.UI.Xaml.Controls.WebView in XAML, and Windows.Web.UI.Interop.WebViewControl in Win32) act the same as the Back and Forward buttons in the Edge browser. They don't necessarily change the top level document of the WebView. If inside the webview an iframe navigates then that navigation will be recorded in the forward/back history and the GoBack / GoForward call may result in navigating that iframe. This makes sense as an end user using the Edge browser since if I click a link to navigate one place and then hit Back I expect to sort of undo that most recent navigation regardless of if that navigation happened in an iframe or the top level document.

If that doesn't make sense for your application and you want to navigate forward or back ignoring iframe navigates, unfortunately there's no perfect workaround.

One workaround could be to try calling GoBack and then checking if a FrameNavigationStarting event fires or a NavigationStarting event fires. If a frame navigates then try calling GoBack again. There could be async races in this case since other navigates could come in and send you the wrong signal and interrupt your multi step GoBack operation.

You could also try keeping track of all top level document navigations and manually navigate back to the URIs you care about. However, GoBack and GoForward also restore some amount of user state (form fills etc) in addition to navigating. Manually calling navigate will not give this same behavior.

Level 7 of the Stripe CTF involved running a length extension attack on the level 7 server's custom crypto code.

Code

@app.route('/logs/')
@require_authentication
def logs(id): 
    rows = get_logs(id) 
    return render_template('logs.html', logs=rows) 

...

def verify_signature(user_id, sig, raw_params):
    # get secret token for user_id
    try:
        row = g.db.select_one('users', {'id': user_id})
    except db.NotFound:
        raise BadSignature('no such user_id')
    secret = str(row['secret'])

    h = hashlib.sha1()
    h.update(secret + raw_params)
    print 'computed signature', h.hexdigest(), 'for body', repr(raw_params)
    if h.hexdigest() != sig:
        raise BadSignature('signature does not match')
    return True

Issue

The level 7 web app is a web API in which clients submit signed RESTful requests and some actions are restricted to particular clients. The goal is to view the response to one of the restricted actions. The first issue is that there is a logs path to display the previous requests for a user and although the logs path requires the client to be authenticatd, it doesn't restrict the logs you view to be for the user for which you are authenticated. So you can manually change the number in the '/logs/[#]' to '/logs/1' to view the logs for the user ID 1 who can make restricted requests. The level 7 web app can be exploited with replay attacks but you won't find in the logs any of the restricted requests we need to run for our goal. And we can't just modify the requests because they are signed.

However they are signed using their own custom signing code which can be exploited by a length extension attack. All Merkle–Damgård hash algorithms (which includes MD5, and SHA) have the property that if you hash data of the form (secret + data) where data is known and the length but not content of secret is known you can construct the hash for a new message (secret + data + padding + newdata) where newdata is whatever you like and padding is determined using newdata, data, and the length of secret. You can find a sha-padding.py script on VNSecurity blog that will tell you the new hash and padding per the above. With that I produced my new restricted request based on another user's previous request. The original request was the following.

count=10&lat=37.351&user_id=1&long=%2D119.827&waffle=eggo|sig:8dbd9dfa60ef3964b1ee0785a68760af8658048c

count=10&lat=37.351&user_id=1&long=%2D119.827&waffle=eggo%80%02%28&waffle=liege|sig:8dbd9dfa60ef3964b1ee0785a68760af8658048c

Notes

Code review red flags included custom crypto looking code. However I am not a crypto expert and it was difficult for me to find the solution to this level.

Stripe's web security CTF's Level 1 and level 2 of the Stripe CTF had issues with missing input validation solutions described below.

Level 1

Code

          $filename = 'secret-combination.txt';
      extract($_GET);
      if (isset($attempt)) {
        $combination = trim(file_get_contents($filename));
        if ($attempt === $combination) {

Issue

The issue here is the usage of the extract php method which extracts name value pairs from the map input parameter and creates corresponding local variables. However this code uses $_GET which contains a map of name value pairs passed in the query of the URI. The expected behavior is to get an attempt variable out, but since no input validation is done I can provide a filename variable and overwrite the value of $filename. Providing an empty string gives an empty string $combination which I can match with an empty string $attempt. So without knowing the combination I can get past the combination check.

Notes

Code review red flag in this case was the direct use of $_GET with no validation. Instead of using extract the developer could try to extract specifically the attempt variable manually without using extract.

Level 2

Code

    $dest_dir = "uploads/";
    $dest = $dest_dir . basename($_FILES["dispic"]["name"]);
    $src = $_FILES["dispic"]["tmp_name"];
    if (move_uploaded_file($src, $dest)) {
      $_SESSION["dispic_url"] = $dest;
      chmod($dest, 0644);
      echo "
Successfully uploaded your display picture.
";
    }

Issue

This code accepts POST uploads of images but with no validation to ensure it is not an arbitrary file. And even though it uses chmod to ensure the file is not executable, things like PHP don't require a file to be executable in order to run them. Accordingly, one can upload a PHP script, then navigate to that script to run it. My PHP script dumped out the contents of the file we're interested in for this level:

Notes

Code review red flags include manual file management, chmod, and use of file and filename inputs without any kind of validation. If this code controlled the filename and ensured that the extension was one of a set of image extensions, this would solve this issue. Due to browser mime sniffing its additionally a good idea to serve a content-type that starts with "image/" for these uploads to ensure browsers treat these as images and not sniff for script or HTML.

Use of my old Hotmail account has really snuck up on me as I end up caring more and more about all of the services with which it is associated. The last straw is Windows 8 login, but previous straws include Xbox, Zune, SkyDrive, and my Windows 7 Phone. I like the features and sync'ing associated with the Windows Live ID, but I don't like my old, spam filled, hotmail email address on the Live ID account.

A coworker told me about creating a Live ID from a custom domain, which sounded like just the ticket for me. Following the instructions above I was able to create a new deletethis.net Live ID but the next step of actually using this new Live ID was much more difficult. My first hope was there would be some way to link my new and old Live IDs so as to make them interchangeable. As it turns out there is a way to link Live IDs but all that does is make it easy to switch between accounts on Live Mail, SkyDrive and some other webpages.

Instead one must change over each service or start over depending on the service:

Xbox

In the Xbox 360 system menu you can change the Live ID associated with your gamertag. This worked fine for me and I got an email telling me about the transfer of my Microsoft Points.

Zune

There's no way to do this for the Zune specifically, however changing over your Xbox account also transfers over all your Zune purchased content. I don't have a Zune Pass so I can't confirm that, but all of my previously purchased television shows transferred over successfully.

Windows 7 Phone

To change the main Live ID associated with your phone, reset your phone to factory default and start over. All purchased applications are lost. Had I purchased any applications I would have been pissed, but instead I was just irritated that I had to reset my phone.

Mail

I don't use my Hotmail account for anything and it only sits and collects spam. Accordingly I didn't attempt switching this over.

SkyDrive

I didn't have much in my SkyDrive account. I downloaded all files as a zip and then manually uploaded them to the new account.

I wanted to ensure that my switch statement in my implementation of IInternetSecurityManager::ProcessURLAction had a case for every possible documented URLACTION. I wrote the following short command line sequence to see the list of all URLACTIONs in the SDK header file not found in my source file:

grep URLACTION urlmon.idl | sed 's/.*\(URLACTION[a-zA-Z0-9_]*\).*/\1/g;' | sort | uniq > allURLACTIONs.txt
grep URLACTION MySecurityManager.cpp | sed 's/.*\(URLACTION[a-zA-Z0-9_]*\).*/\1/g;' | sort | uniq > myURLACTIONs.txt
comm -23 allURLACTIONs.txt myURLACTIONs.txt

But in my effort to learn and use PowerShell I found the following similar command line:

diff 
(more urlmon.idl | %{ if ($_ -cmatch "URLACTION[a-zA-Z0-9_]*") { $matches[0] } } | sort -uniq) 
(more MySecurityManager.cpp | %{ if ($_ -cmatch "URLACTION[a-zA-Z0-9_]*") { $matches[0] } } | sort -uniq)

When you run clip.exe, whatever comes into its standard input is put onto the clipboard. So when you need to move the result of something in your command window somewhere else you can pipe the result into clip.exe. Then you won't have to worry about the irritating way cmd.exe does block copy/pasting and you avoid having to manually fixup line breaks in wrapped lines. For instance, you can put the contents of a script into the clipboard with:

more cdo.cmd | clip

I've got a lot of stuff dumped in my bin folder that I sync across all my PCs so I didn't realize that clip.exe is a part of standard Windows installs.

Nice for avoiding the block copy in cmd.exe but I'd prefer to have the contents sort of tee'd into the clipboard and standard output. So TeeClip.ps1:

$input | tee -var teeclipout | clip;
$teeclipout;