and page 7 - Dave's Blog

Search
My timeline on Mastodon

Retweet of AndyPavia

2016 Feb 11, 1:33
@k_seks @jarennert Using FaceDetect on a Raspberry Pi #WebOnPi #IoT #windows10 @MSEdgeDev pic.twitter.com/Qk2PyoedBP
PermalinkComments

Cdb/Windbg Commands for Runtime Patching

2016 Feb 8, 1:47

You can use conditional breakpoints and debugging commands in windbg and cdb that together can amount to effectively patching a binary at runtime. This can be useful if you have symbols but you can't easily rebuild the binary. Or if the patch is small and the binary requires a great deal of time to rebuild.

Skipping code

If you want to skip a chunk of code you can set a breakpoint at the start address of the code to skip and set the breakpoint's command to change the instruction pointer register to point to the address at the end of the code to skip and go. Voila you're skipping over that code now. For example:

bp 0x6dd6879b "r @eip=0x6dd687c3 ; g"

Changing parameters

You may want to modify parameters or variables and this is simple of course. In the following example a conditional breakpoint ANDs out a bit from dwFlags. Now when we run its as if no one is passing in that flag.

bp wiwi!RelativeCrack "?? dwFlags &= 0xFDFFFFFF;g"

Slightly more difficult is to modify string values. If the new string length is the same size or smaller than the previous, you may be able to modify the string value in place. But if the string is longer or the string memory isn't writable, you'll need a new chunk of memory into which to write your new string. You can use .dvalloc to allocate some memory and ezu to write a string into the newly allocated memory. In the following example I then overwrite the register containing the parameter I want to modify:

.dvalloc 100
ezu 000002a9`d4eb0000 "mfcore.dll"
r rcx = 000002a9`d4eb0000

Calling functions

You can also use .call to actually make new calls to methods or functions. Read more about that on the Old New Thing: Stupid debugger tricks: Calling functions and methods. Again, all of this can be used in a breakpoint command to effectively patch a binary.

PermalinkCommentscdb debug technical windbg

Tweet from David_Risney

2016 Feb 4, 10:16
My notes and experience with LetEncrypt on my NearlyFreeSpeech hosted blog: https://deletethis.net/dave/2016-02/Let%27s+Encrypt+NearlyFreeSpeech.net+Setup …. TLDR:difficulty 4/10
PermalinkComments

Let's Encrypt NearlyFreeSpeech.net Setup

2016 Feb 4, 2:48

2016-Nov-5: Updated post on using Let's Encrypt with NearlyFreeSpeech.net

I use NearlyFreeSpeech.net for my webhosting for my personal website and I've just finished setting up TLS via Let's Encrypt. The process was slightly more complicated than what you'd like from Let's Encrypt. So for those interested in doing the same on NearlyFreeSpeech.net, I've taken the following notes.

The standard Let's Encrypt client requires su/sudo access which is not available on NearlyFreeSpeech.net's servers. Additionally NFSN's webserver doesn't have any Let's Encrypt plugins installed. So I used the Let's Encrypt Without Sudo client. I followed the instructions listed on the tool's page with the addition of providing the "--file-based" parameter to sign_csr.py.

One thing the script doesn't produce is the chain file. But this topic "Let's Encrypt - Quick HOWTO for NSFN" covers how to obtain that:

curl -o domain.chn https://letsencrypt.org/certs/lets-encrypt-x1-cross-signed.pem

Now that you have all the required files, on your NFSN server make the directory /home/protected/ssl and copy your files into it. This is described in the NFSN topic provide certificates to NFSN. After copying the files and setting their permissions as described in the previous link you submit an assistance request. For me it was only 15 minutes later that everything was setup.

After enabling HTTPS I wanted to have all HTTP requests redirect to HTTPS. The normal Apache documentation on how to do this doesn't work on NFSN servers. Instead the NFSN FAQ describes it in "redirect http to https and HSTS". You use the X-Forwarded-Proto instead of the HTTPS variable because of how NFSN's virtual hosting is setup.

RewriteEngine on
RewriteCond %{HTTP:X-Forwarded-Proto} !https
RewriteRule ^.*$ https://%{SERVER_NAME}%{REQUEST_URI} [L,R=301]

Turning on HSTS is as simple as adding the HSTS HTTP header. However, the description in the above link didn't work because my site's NFSN realm isn't on the latest Apache yet. Instead I added the following to my .htaccess. After I'm comfortable with everything working well for a few days I'll start turning up the max-age to the recommended minimum value of 180 days.

Header set Strict-Transport-Security "max-age=3600;" 

Finally, to turn on CSP I started up Fiddler with my CSP Fiddler extension. It allows me to determine the most restrictive CSP rules I could apply and still have all resources on my page load. From there I found and removed inline script and some content loaded via http and otherwise continued tweaking my site and CSP rules.

After I was done I checked out my site on SSL Lab's SSL Test to see what I might have done wrong or needed improving. The first time I went through these steps I hadn't included the chain file which the SSL Test told me about. I was able to add that file to the same files I had already previously generated from the Let's Encrypt client and do another NFSN assistance request and 15 minutes later the SSL Test had upgraded me from 'B' to 'A'.

PermalinkCommentscertificate csp hsts https lets-encrypt nearlyfreespeech.net

Tweet from David_Risney

2016 Feb 2, 11:11
Frinkiac search terms gives Simpsons screencaps. https://frinkiac.com/?p=caption&q=go+school&e=S10E02&t=387970 …. Make it video and always listening and I'll wear it on my face.
PermalinkComments

Tweet from David_Risney

2016 Feb 1, 10:44
Chakra conversions between JavaScript objects and WinRT types: http://deletethis.net/dave/?uri=http%3A%2F%2Fdavescoolblog.blogspot.com%2F2016%2F01%2Fjavascript-types-and-winrt-types.html … I've just updated to note how IPropertySet works.
PermalinkComments

4 people are living in an isolated habitat for 30 days. Why? Science!

2016 Feb 1, 3:27

nasa:

This 30 day mission will help our researchers learn how isolation and close quarters affect individual and group behavior. This study at our Johnson Space Center prepares us for long duration space missions, like a trip to an asteroid or even to Mars.

image

The Human Research Exploration Analog (HERA) that the crew members will be living in is one compact, science-making house. But unlike in a normal house, these inhabitants won’t go outside for 30 days. Their communication with the rest of planet Earth will also be very limited, and they won’t have any access to internet. So no checking social media kids!

The only people they will talk with regularly are mission control and each other.

image

The crew member selection process is based on a number of criteria, including the same criteria for astronaut selection.

What will they be doing?

Because this mission simulates a 715-day journey to a Near-Earth asteroid, the four crew members will complete activities similar to what would happen during an outbound transit, on location at the asteroid, and the return transit phases of a mission (just in a bit of an accelerated timeframe). This simulation means that even when communicating with mission control, there will be a delay on all communications ranging from 1 to 10 minutes each way. The crew will also perform virtual spacewalk missions once they reach their destination, where they will inspect the asteroid and collect samples from it. 

A few other details:

  • The crew follows a timeline that is similar to one used for the ISS crew.
  • They work 16 hours a day, Monday through Friday. This includes time for daily planning, conferences, meals and exercises.  
  • They will be growing and taking care of plants and brine shrimp, which they will analyze and document.

But beware! While we do all we can to avoid crises during missions, crews need to be able to respond in the event of an emergency. The HERA crew will conduct a couple of emergency scenario simulations, including one that will require them to maneuver through a debris field during the Earth-bound phase of the mission. 

image

Throughout the mission, researchers will gather information about cohabitation, teamwork, team cohesion, mood, performance and overall well-being. The crew members will be tracked by numerous devices that each capture different types of data.

image

Past HERA crew members wore a sensor that recorded heart rate, distance, motion and sound intensity. When crew members were working together, the sensor would also record their proximity as well, helping investigators learn about team cohesion.

Researchers also learned about how crew members react to stress by recording and analyzing verbal interactions and by analyzing “markers” in blood and saliva samples.

image

In total, this mission will include 19 individual investigations across key human research elements. From psychological to physiological experiments, the crew members will help prepare us for future missions.

Make sure to follow us on Tumblr for your regular dose of space: http://nasa.tumblr.com

PermalinkComments

4 people are living in an isolated habitat for 30 days. Why? Science!

2016 Feb 1, 3:27

nasa:

This 30 day mission will help our researchers learn how isolation and close quarters affect individual and group behavior. This study at our Johnson Space Center prepares us for long duration space missions, like a trip to an asteroid or even to Mars.

image

The Human Research Exploration Analog (HERA) that the crew members will be living in is one compact, science-making house. But unlike in a normal house, these inhabitants won’t go outside for 30 days. Their communication with the rest of planet Earth will also be very limited, and they won’t have any access to internet. So no checking social media kids!

The only people they will talk with regularly are mission control and each other.

image

The crew member selection process is based on a number of criteria, including the same criteria for astronaut selection.

What will they be doing?

Because this mission simulates a 715-day journey to a Near-Earth asteroid, the four crew members will complete activities similar to what would happen during an outbound transit, on location at the asteroid, and the return transit phases of a mission (just in a bit of an accelerated timeframe). This simulation means that even when communicating with mission control, there will be a delay on all communications ranging from 1 to 10 minutes each way. The crew will also perform virtual spacewalk missions once they reach their destination, where they will inspect the asteroid and collect samples from it. 

A few other details:

  • The crew follows a timeline that is similar to one used for the ISS crew.
  • They work 16 hours a day, Monday through Friday. This includes time for daily planning, conferences, meals and exercises.  
  • They will be growing and taking care of plants and brine shrimp, which they will analyze and document.

But beware! While we do all we can to avoid crises during missions, crews need to be able to respond in the event of an emergency. The HERA crew will conduct a couple of emergency scenario simulations, including one that will require them to maneuver through a debris field during the Earth-bound phase of the mission. 

image

Throughout the mission, researchers will gather information about cohabitation, teamwork, team cohesion, mood, performance and overall well-being. The crew members will be tracked by numerous devices that each capture different types of data.

image

Past HERA crew members wore a sensor that recorded heart rate, distance, motion and sound intensity. When crew members were working together, the sensor would also record their proximity as well, helping investigators learn about team cohesion.

Researchers also learned about how crew members react to stress by recording and analyzing verbal interactions and by analyzing “markers” in blood and saliva samples.

image

In total, this mission will include 19 individual investigations across key human research elements. From psychological to physiological experiments, the crew members will help prepare us for future missions.

Make sure to follow us on Tumblr for your regular dose of space: http://nasa.tumblr.com

PermalinkComments

Retweet of Real_CSS_Tricks

2016 Jan 30, 8:30
display: contents;It's new.https://rachelandrew.co.uk/archives/2016/01/29/vanishing-boxes-with-display-contents/ …parent (disp flex) child (disp contents) grandchildgrandchild now flex item
PermalinkComments

Retweet of mathias

2016 Jan 27, 10:29
Take any Facebook/Instagram photo URL.👉 append `.txt` → ASCII art👉 append `.html` → colored ASCII artE.g. https://scontent-ams3-1.cdninstagram.com/t51.2885-15/e35/11906246_1700002456899911_1391970345_n.jpg.html …
PermalinkComments

Tweet from David_Risney

2016 Jan 27, 9:15
Whatever happened to sitcom couples? Conspiracy and death. https://medium.com/@iamchrisscott/whatever-happened-to-television-s-most-famous-couples-c9d569a892ea#.w2wijr6he … Had to recheck URL I wasn't on clickhole
PermalinkComments

Retweet of TheAVClub

2016 Jan 25, 4:05
ICYMI: “Weird Al” Yankovic joins Comedy Bang! Bang! as bandleader and co-host http://avc.lu/1nkaxWC 
PermalinkComments

Unicode Clock

2016 Jan 24, 2:00

I've made a Unicode Clock in JavaScript.

Unicode has code points for all 30 minute increments of clock faces. This is a simple project to display the one closest to the current time written in JavaScript.

Because the code points are all above 0xFFFF, I make use of some ES6 additions. I use the \u{XXXXXX} style escape sequence since the old style JavaScript escape sequence \uXXXX only supports code points up to 0xFFFF. I also use the method String.codePointAt rather than String.charCodeAt because the code points larger than 0xFFFF are represented in JavaScript strings using surrogate pairs and charCodeAt gives the surrogate value rather than codePointAt which gives the code point represented by the pair of surrogates.

"🕛".codePointAt(0)
128347
"🕛".charCodeAt(0)
55357

🕐🕑🕒🕓🕔🕕🕖🕗🕘🕙🕚🕛🕜🕝🕞🕟🕠🕡🕢🕣🕤🕥🕦🕧

The ordering of the code points does not make it simple to do this. I initially guessed the first code point in the range would be 12:00 followed by 12:30, 1:00 and so on. But actually 1:00 is first followed by all the on the hour times then all the half hour times.

PermalinkCommentsjavascript Unicode

JavaScript Types and WinRT Types

2016 Jan 21, 5:35

MSDN covers the topic of JavaScript and WinRT type conversions provided by Chakra (JavaScript Representation of Windows Runtime Types and Considerations when Using the Windows Runtime API), but for the questions I get about it I’ll try to lay out some specifics of that discussion more plainly. I’ve made a TL;DR JavaScript types and WinRT types summary table.

WinRT Conversion JavaScript
Struct ↔️ JavaScript object with matching property names
Class or interface instance JavaScript object with matching property names
Windows.Foundation.Collections.IPropertySet JavaScript object with arbitrary property names
Any DOM object

Chakra, the JavaScript engine powering the Edge browser and JavaScript Windows Store apps, does the work to project WinRT into JavaScript. It is responsible for, among other things, converting back and forth between JavaScript types and WinRT types. Some basics are intuitive, like a JavaScript string is converted back and forth with WinRT’s string representation. For other basic types check out the MSDN links at the top of the page. For structs, interface instances, class instances, and objects things are more complicated.

A struct, class instance, or interface instance in WinRT is projected into JavaScript as a JavaScript object with corresponding property names and values. This JavaScript object representation of a WinRT type can be passed into other WinRT APIs that take the same underlying type as a parameter. This JavaScript object is special in that Chakra keeps a reference to the underlying WinRT object and so it can be reused with other WinRT APIs.

However, if you start with plain JavaScript objects and want to interact with WinRT APIs that take non-basic WinRT types, your options are less plentiful. You can use a plain JavaScript object as a WinRT struct, so long as the property names on the JavaScript object match the WinRT struct’s. Chakra will implicitly create an instance of the WinRT struct for you when you call a WinRT method that takes that WinRT struct as a parameter and fill in the WinRT struct’s values with the values from the corresponding properties on your JavaScript object.

// C# WinRT component
public struct ExampleStruct
{
public string String;
public int Int;
}

public sealed class ExampleStructContainer
{
ExampleStruct value;
public void Set(ExampleStruct value)
{
this.value = value;
}

public ExampleStruct Get()
{
return this.value;
}
}

// JS code
var structContainer = new ExampleWinRTComponent.ExampleNamespace.ExampleStructContainer();
structContainer.set({ string: "abc", int: 123 });
console.log("structContainer.get(): " + JSON.stringify(structContainer.get()));
// structContainer.get(): {"string":"abc","int":123}

You cannot have a plain JavaScript object and use it as a WinRT class instance or WinRT interface instance. Chakra does not provide such a conversion even with ES6 classes.

You cannot take a JavaScript object with arbitrary property names that are unknown at compile time and don’t correspond to a specific WinRT struct and pass that into a WinRT method. If you need to do this, you have to write additional JavaScript code to explicitly convert your arbitrary JavaScript object into an array of property name and value pairs or something else that could be represented in WinRT.

However, the other direction you can do. An instance of a Windows.Foundation.Collections.IPropertySet implementation in WinRT is projected into JavaScript as a JavaScript object with property names and values corresponding to the key and value pairs in the IPropertySet. In this way you can project a WinRT object as a JavaScript object with arbitrary property names and types. But again, the reverse is not possible. Chakra will not convert an arbitrary JavaScript object into an IPropertySet.

// C# WinRT component
public sealed class PropertySetContainer
{
private Windows.Foundation.Collections.IPropertySet otherValue = null;

public Windows.Foundation.Collections.IPropertySet other
{
get
{
return otherValue;
}
set
{
otherValue = value;
}
}
}

public sealed class PropertySet : Windows.Foundation.Collections.IPropertySet
{
private IDictionary map = new Dictionary();

public PropertySet()
{
map.Add("abc", "def");
map.Add("ghi", "jkl");
map.Add("mno", "pqr");
}
// ... rest of PropertySet implementation is simple wrapper around the map member.


// JS code
var propertySet = new ExampleWinRTComponent.ExampleNamespace.PropertySet();
console.log("propertySet: " + JSON.stringify(propertySet));
// propertySet: {"abc":"def","ghi":"jkl","mno":"pqr"}

var propertySetContainer = new ExampleWinRTComponent.ExampleNamespace.PropertySetContainer();
propertySetContainer.other = propertySet;
console.log("propertySetContainer.other: " + JSON.stringify(propertySetContainer.other));
// propertySetContainer.other: {"abc":"def","ghi":"jkl","mno":"pqr"}

try {
propertySetContainer.other = { "123": "456", "789": "012" };
}
catch (e) {
console.error("Error setting propertySetContainer.other: " + e);
// Error setting propertySetContainer.other: TypeError: Type mismatch
}

There’s also no way to implicitly convert a DOM object into a WinRT type. If you want to write third party WinRT code that interacts with the DOM, you must do so indirectly and explicitly in JavaScript code that is interacting with your third party WinRT. You’ll have to extract the information you want from your DOM objects to pass into WinRT methods and similarly have to pass messages out from WinRT that say what actions the JavaScript should perform on the DOM.

PermalinkCommentschakra development javascript winrt

Tweet from David_Risney

2016 Jan 17, 5:39
Previously unaware how much of a monster truck show is spent towing and repairing monster trucks. pic.twitter.com/APGXMglRXQ
PermalinkComments

Retweet of aragusea

2016 Jan 12, 10:36
Is the @StarTrek TNG episode "Darmok" linguistically implausible? I and @drpizza have it out. https://storify.com/aragusea/darmok  #important
PermalinkComments

Retweet of kumailn

2016 Jan 11, 7:30
I got to be in an ep of @thexfiles. While shooting late I got to record a casual convo w @GillianA & @davidduchovny. http://www.feralaudio.com/55-kumail-talks-to-david-duchovny-and-gillian-anderson-on-the-set-of-the-x-files/ …
PermalinkComments

Retweet of randileeharper

2016 Jan 11, 6:26
I demand a new Katamari game for Xbox One. please.
PermalinkComments

Retweet of KenJennings

2016 Jan 6, 8:54
"I suppose Marla Maples is his first lady! And Ivan Boesky...is secretary of the treasury!"
PermalinkComments

Retweet of TipoTipos

2016 Jan 4, 12:12
Someday, someone will think deeply about the use value of social media and invent something better. It will be called RSS.
PermalinkComments
Older EntriesNewer Entries Creative Commons License Some rights reserved.