event page 2 - Dave's Blog

Occasionally I have need to run a set of unrelated promises in series, for instance an object dealing with a WinRT camera API that can only execute one async operation at a time, or an object handling postMessage message events and must resolve associated async operations in the same order it received the requests. The solution is very simply to keep track of the last promise and when adding a new promise in serial add a continuation of the last promise to execute the new promise and point the last promise at the result. I encapsulate the simple solution in a simple constructor:

    function PromiseExecutionSerializer() {
        var lastPromise = WinJS.Promise.wrap(); // Start with an empty fulfilled promise.

        this.addPromiseForSerializedExecution = function(promiseFunction) {
            lastPromise = lastPromise.then(function () {
                // Don't call directly so next promise doesn't get previous result parameter.
                return promiseFunction();
            });
        }
    }

The only thing to watch out for is to ensure you don't pass the result of a previous promise onto a subsequent promise that is unrelated.

When writing a JavaScript library that uses postMessage and the message event, I must be considerate of other JS code that will be running along side my library. I shouldn't assume I'm the only sender and receiver on a caller provided MessagePort object. This means obviously I should use addEventListener("message" rather than the onmessage property (see related What if two programs did this?). But considering the actual messages traveling over the message channel I have the issue of accidentally processing another libraries messages and having another library accidentally process my own message. I have a few options for playing nice in this regard:

Require a caller provided unique MessagePort

This solves the problem but puts a lot of work on the caller who may not notice nor follow this requirement.

Uniquely mark my messages

To ensure I'm acting upon my own messages and not messages that happen to have similar properties as my own, I place a 'type' property on my postMessage data with a value of a URN unique to me and my JS library. Usually because its easy I use a UUID URN. There's no way someone will coincidentally produce this same URN. With this I can be sure I'm not processing someone else's messages. Of course there's no way to modify my postMessage data to prevent another library from accidentally processing my messages as their own. I can only hope they take similar steps as this and see that my messages are not their own.

Use caller provided MessagePort only to upgrade to new unique MessagePort

I can also make my own unique MessagePort for which only my library will have the end points. This does still require the caller to provide an initial message channel over which I can communicate my new unique MessagePort which means I still have the problems above. However it clearly reduces the surface area of the problem since I only need once message to communicate the new MessagePort.

The best solution is likely all of the above.
Photo is Sharing by leezie5. Two squirrels sharing food hanging from a bird feeder. Used under Creative Commons license Attribution-NonCommercial-NoDerivs 2.0 Generic.

My first app for Windows 8 was Shout Text. You type into Shout Text, and your text is scaled up as large as possible while still fitting on the screen, as you type. It is the closest thing to a Hello World app as you'll find on the Windows Store that doesn't contain that phrase (by default) and I approached it as the simplest app I could make to learn about Windows modern app development and Windows Store app submission.

I rely on WinJS's default layout to use CSS transforms to scale up the user's text as they type. And they are typing into a simple content editable div.

The app was too simple for me to even consider using ads or charging for it which I learned more about in future apps.

The first interesting issue I ran into was that copying from and then pasting into the content editable div resulted in duplicates of the containing div with copied CSS appearing recursively inside of the content editable div. To fix this I had to catch the paste operation and remove the HTML data from the clipboard to ensure only the plain text data is pasted:

        function onPaste() {
            var text;

            if (window.clipboardData) {
                text = window.clipboardData.getData("Text").toString();
                window.clipboardData.clearData("Html");
                window.clipboardData.setData("Text", util.normalizeContentEditableText(text));
            }
        }
        shoutText.addEventListener("beforepaste", function () { return false; }, false);
        shoutText.addEventListener("paste", onPaste, false);

I additionally found an issue in IE in which applying a CSS transform to a content editable div that has focus doesn't move the screen position of the user input caret - the text is scaled up or down but the caret remains the same size and in the same place on the screen. To fix this I made the following hack to reapply the current cursor position and text selection which resets the screen position of the user input caret.

        function resetCaret() {
            setTimeout(function () {
                var cursorPos = document.selection.createRange().duplicate();
                cursorPos.select();
            }, 200);
        }

        shoutText.attachEvent("onresize", function () { resetCaret(); }, true);

Level 8 of the Stripe CTF is a password server that returns success: true if and only if the password provided matches the password stored directly via a RESTful API and optionally indirectly via a callback URI. The solution is side channel attack like a timing attack but with ports instead of time.

(I found this in my drafts folder and had intended to post a while ago.)

Code

    def nextServerCallback(self, data):
        parsed_data = json.loads(data)
        # Chunk was wrong!
        if not parsed_data['success']:
            # Defend against timing attacks
            remaining_time = self.expectedRemainingTime()
            self.log_info('Going to wait %s seconds before responding' %
                          remaining_time)
            reactor.callLater(remaining_time, self.sendResult, False)
            return

        self.checkNext()

Issue

The password server breaks the target password into four pieces and stores each on a different server. When a password request is sent to the main server it makes requests to the sub-servers for each part of the password request. It does this in series and if any part fails, then it stops midway through. Password requests may also be made with corresponding URI callbacks and after the server decides on the password makes an HTTP request on the provided URI callbacks saying if the password was success: true or false.
A timing attack looks at how long it took for a password to be rejected and longer times could mean a longer prefix of the password was correct allowing for a directed brute force attack. Timing attacks are prevented in this case by code on the password server that attempts to wait the same amount of time, even if the first sub-server responds with false. However, the server uses sequential outgoing port numbers shared between the requests to the sub-servers and the callback URIs. Accordingly, we can examine the port numbers on our callback URIs to direct a brute force attack.
If the password provided is totally incorrect then the password server will contact one sub-server and then your callback URI. So if you see the remote server's port number go up by two when requesting your callback URI, you know the password is totally incorrect. If by three then you know the first fourth of the password is correct and the rest is incorrect. If by four then two fourths of the password is correct. If by five then four sub-servers were contacted so you need to rely on the actual content of the callback URI request of 'success: true' or 'false' since you can't tell from the port change if the password was totally correct or not.
The trick in the real world is false positives. The port numbers are sequential over the system, so if the password server is the only thing making outgoing requests then its port numbers will also be sequential, however other things on the system can interrupt this. This means that the password server could contact three sub-servers and normally you'd see the port number increase by four, but really it could increase by four or more because of other things running on the system. To counteract this I ran in cycles: brute forcing the first fourth of the password and removing any entry that gets a two port increase and keeping all others. Eventually I could remove all but the correct first fourth of the password. And so on for the next parts of the password.
I wrote my app to brute force this in Python. This was my first time writing Python code so it is not pretty.

I keep seeing crowdsource projects with big names that I actually want to back:

• New Ben Folds Five album
• New Double Fine Adventure game
• New Amanda Palmer album
• New Space Quest (like) game

I had previously replaced my use of Delicious with Google Reader. Delicious had a number of issues during their switch over from Yahoo to the new owners and I was eventually fed up enough to remove it from daily use. I used Delicious to do the following things:

• Create a list of things to read later
• Save things to read again in the future
• Search through things I read and enjoyed (esp via tags)
• Annotate and share things on my blog

I realized that since I did most of my web browsing in Google Reader now anyway I may as well make use of its features. I star things to note I want to read it later or save to read again later. I can annotate with notes in Google Reader and I can share items to my web site by way of the shared items feed. Additionally for when I'm not in Google Reader there's a bookmarklet to add an arbitrary web site as a shared item in Google Reader.

Of course I wrote this and switched over about 1 week before Google removed the sharing feature from Google Reader. I'm irritated but in practice it forced me to find a different option which has worked out mostly better. New blog post coming soon about that...

I used FiddlerCore in GeolocMock to edit HTTPS responses and ran into two stumbling blocks that I'll document here. The first is that I didn't check if the Fiddler root cert existed or was installed, which of course is necessary to edit HTTPS traffic. The following is my code where I check for the certs.

    if (!Fiddler.CertMaker.rootCertExists())
    {
        if (!Fiddler.CertMaker.createRootCert())
        {
            throw new Exception("Unable to create cert for FiddlerCore.");
        }
    }

    if (!Fiddler.CertMaker.rootCertIsTrusted())
    {
        if (!Fiddler.CertMaker.trustRootCert())
        {
            throw new Exception("Unable to install FiddlerCore's cert.");
        }
    }

The second problem I had (which would have been solved had I read all the sample code first) was that my changes weren't being applied. In my app I only need the BeforeResponse but in order to modify the response I must also sign up for the BeforeRequest event and mark the bBufferResponse flag on the session before the response comes back. For example:

    Fiddler.FiddlerApplication.BeforeRequest += new SessionStateHandler(FiddlerApplication_BeforeRequest);
    Fiddler.FiddlerApplication.BeforeResponse += new SessionStateHandler(FiddlerApplication_BeforeResponse);
...
    private void FiddlerApplication_BeforeRequest(Session oSession)
    {
        if (IsInterestingSession(oSession))
        {
            oSession.bBufferResponse = true;
        }
    }

Working on GeolocMock it took me a bit to realize why my HTML could use the W3C Geolocation API in IE9 but not in my WebBrowser control in my .NET application. Eventually I realized that I was getting the wrong IE doc mode. Reading this old More IE8 Extensibility Improvements IE blog post from the IE blog I found the issue is that for app compat the WebOC picks older doc modes but an app hosting the WebOC can set a regkey to get different doc modes. The IE9 mode isn't listed in that article but I took a guess based on the values there and the decimal value 9999 gets my app IE9 mode. The following is the code I run in my application to set its regkey so that my app can get the IE9 doc mode and use the geolocation API.

        static private void UseIE9DocMode()
        {
            RegistryKey key = null;
            try
            {
                key = Registry.CurrentUser.OpenSubKey("Software\\Microsoft\\Internet Explorer\\Main\\FeatureControl\\FEATURE_BROWSER_EMULATION", true);
            }
            catch (Exception)
            {
                key = Registry.CurrentUser.CreateSubKey("Software\\Microsoft\\Internet Explorer\\Main\\FeatureControl\\FEATURE_BROWSER_EMULATION");
            }
            key.SetValue(System.Diagnostics.Process.GetCurrentProcess().MainModule.ModuleName, 9999, RegistryValueKind.DWord);
            key.Close();
        }

I just found out that I like the group Ratatat. I'd first heard them way back when the Zune was first released as the backing for Los Corazones on the zune-arts.net website.




But I didn't know who they were until today when I watched this Filmography 2010 video (via Kottke)



Until about 1:16 in, the music is Ratatat's Nostrand. On the first viewing it drove me crazy because I could only vaguely recall hearing something like that music before. I tracked it down via the zune-arts thing above and eventually found my way to the Nostrand video. Funny, all the recent comments on that one are from people who also just watched the Filmography video.