rest page 5 - Dave's Blog

Cheap Multiplayer Tricks for New Super Mario Bros. Wii

The New Super Mario Bros. Wii is a great game. Its the fun of old school Mario with the addition of great graphics and the kind of multiplayer I've wanted for Mario since playing the original as a child: its got up to four player simultaneous cooperative multiplayer. I recommend it to anyone who has enjoyed Mario in the past. Watch this amazing video of level 1-3 you can unlock in the game.

As noted elsewhere, multiple players attempting to navigate platforms, grab power ups, and throw turtle shells creates new challenges but along with that there's new ways to be incredibly cheap.

Jumping Higher

A second player means a head one can jump on to reach higher locations. Jump on your friend's head at the apex of their jump while holding down the jump button yourself for maximum jumping. In the game you can also grab other players and hold them over your head. This is useful for reaching the top of the flagpole at the end of levels. On that same line, if the player you grab has a flying cap you can now use them to fly in the same manner you would use a flying block which makes it easy to get two players to the top of the finish flagpole if only one of you has a flying cap.

Power-Ups

Normal power-up blocks now spawn enough power-ups for everyone. A mushroom is spawned for each small player and full power-ups for the rest, except in the case everyone is small: then one of the power-ups is a full power-up. If there's two players and you're both small, the full power-up always jumps out of the block to the right. Some hidden power-up blocks only give out one power-up and in that case its a mushroom or not based on the player who hits the block - so be sure that a big player hits that if you have one.

Death & Bubbles

When a player dies but at least one other player lives the dead player comes back in a limbo bubble from which they must be released before they may play again. Because of this, in a tough spot you can send one player in and leave a second behind. If the first dies you don't lose your place in the level and the first comes back in a bubble ready to try again. For instance, if you're trying to get the last star coin in 2-1 which sits just above the abyss, one player can just jump to their death for it and as long as another player lives you've collected the coin. However you need not sacrifice your life to do this: you can press down and 'a' to force yourself into a bubble saving yourself from death. This is true in general as long as you have enough time to see your death coming. This is also useful if one player runs ahead to the right. The screen will expand a bit but then it will just move to the right following the player in the lead. Players left behind walls or now forced into lava pits will die unless they use the bubble.

Misc.

• If all players hit the ground at the same time from a ground pound it acts like hitting a pow block, killing the enemies on the screen.
• If you hold a player who has a projectile power over your head they can still use their power.
• Bubbles can be popped by hitting them with your fire or ice projectiles as well as thrown shells or blocks.
• All players get the extra lives from anyone collecting 100 coins or finishing a level with more than 7 enemies on the screen.

Grocery Shopper Data Use

QFC, the grocery store closest to me, has those irritating shoppers cards. They try to motivate me to use it with discounts, but that just makes me want to use a card, I don't care whose card and I don't care if the data is accurate. They should let me have my data or make it useful to me so that I actually care.

I can imagine several useful tools based on this: automatic grocery lists, recipes using the food you purchased, cheaper alternatives to your purchases, other things you might like based on what you purchased, or integration with dieting websites or software. At any rate, right now all I care about is getting the discount from using a card, but if they made the data available to me then the grocery store could align our interests and I'd want to ensure the data's accuracy.

Creating Accelerators for Other People's Web Services

Before we shipped IE8 there were no Accelerators, so we had some fun making our own for our favorite web services. I've got a small set of tips for creating Accelerators for other people's web services. I was planning on writing this up as an IE blog post, but Jon wrote a post covering a similar area so rather than write a full and coherent blog post I'll just list a few points:

• The first thing to try is looking for developer help for the web service, specifically if there's a REST-ful URL based API. For example, Bing Maps has great URL API documentation that would be enough to create an Accelerator.
• The Accelerator XML is very similar to HTML forms. If you can find an HTML form for the web service for which you want to create an Accelerator, you can view the HTML source and create an Accelerator based on that.
• I created the FormToAccelerator extension based on the previous idea. You can use the extension to create an Accelerator from an HTML form, or just use it to create the start of one and edit it manually after.
• If the page doesn't use an HTML form, you can start up an HTTP debugger like Fiddler, use the web service from the normal web page, and then in Fiddler see if you can find a REST-ful looking URL you can use.
• When looking to create a preview for your Accelerator, see if the web page for the web service has a mobile version or a version that's intended to embed in other web pages via an iframe. On this same line, iPhone apps make great Accelerators usually with lovely previews.
• If there's no mobile or embeddable version and the only thing wrong with the normal web page for the web service is that the useful information doesn't fit in the preview window then see if you can find an HTML tag with a name or id near the useful information, and stick a '#' fragment pointing to that tag onto the preview URL template.
• Without a reasonable REST-ful API you can use a combination of Google's "site:" and "I'm Feeling Lucky" to find the most relevant page on a particular site.
• The value of a name and value pair need not consist of only a single Accelerator variable. You can get creative and put other text in there. For instance, I implemented a Google currency conversion by setting the query to "{selection} in US Dollars".

Eat Pants - Interactive Fiction Sessions from my Server Logs

I've looked at my web server logs previously to see if anyone had used my Web Frotz Interpreter and until recently didn't realize that awstats (the web server log report generator) was truncating the query from my URL, so I couldn't tell that anyone was actually using it. But after grepping the logs manually I've pulled out the URLs of visitor's text adventure sessions. If you'll recall, my Web Frotz Interpreter stores the game state in the URL so its easy to see user's game states in the web server logs.

I've put some of the links up on the Web Frotz Interpreter page. Some of the interesting ones:

• Apparently you can eat pants in Lost Pig.
• Someone teaches me that in Zork the egg goes in the display case.
• There's a creepy exchange in Galatea.

PowerShell Scanning Script

I've hooked up the printer/scanner to the Media Center PC since I leave that on all the time anyway so we can have a networked printer. I wanted to hook up the scanner in a somewhat similar fashion but I didn't want to install HP's software (other than the drivers of course). So I've written my own script for scanning in PowerShell that does the following:

1. Scans using the Windows Image Acquisition APIs via COM
2. Runs OCR on the image using Microsoft Office Document Imaging via COM (which may already be on your PC if you have Office installed)
3. Converts the image to JPEG using .NET Image APIs
4. Stores the OCR text into the EXIF comment field using .NET Image APIs (which means Windows Search can index the image by the text in the image)
5. Moves the image to the public share

Here's the actual code from my scan.ps1 file:

param([Switch] $ShowProgress, [switch] $OpenCompletedResult)

$filePathTemplate = "C:\users\public\pictures\scanned\scan {0} {1}.{2}";
$time = get-date -uformat "%Y-%m-%d";

[void]([reflection.assembly]::loadfile( "C:\Windows\Microsoft.NET\Framework\v2.0.50727\System.Drawing.dll"))

$deviceManager = new-object -ComObject WIA.DeviceManager
$device = $deviceManager.DeviceInfos.Item(1).Connect();

foreach ($item in $device.Items) {
        $fileIdx = 0;
        while (test-path ($filePathTemplate -f $time,$fileIdx,"*")) {
                [void](++$fileIdx);
        }

        if ($ShowProgress) { "Scanning..." }

        $image = $item.Transfer();
        $fileName = ($filePathTemplate -f $time,$fileIdx,$image.FileExtension);
        $image.SaveFile($fileName);
        clear-variable image

        if ($ShowProgress) { "Running OCR..." }

        $modiDocument = new-object -comobject modi.document;
        $modiDocument.Create($fileName);
        $modiDocument.OCR();
        if ($modiDocument.Images.Count -gt 0) {
                $ocrText = $modiDocument.Images.Item(0).Layout.Text.ToString().Trim();
                $modiDocument.Close();
                clear-variable modiDocument

                if (!($ocrText.Equals(""))) {
                        $fileAsImage = New-Object -TypeName system.drawing.bitmap -ArgumentList $fileName
                        if (!($fileName.EndsWith(".jpg") -or $fileName.EndsWith(".jpeg"))) {
                                if ($ShowProgress) { "Converting to JPEG..." }

                                $newFileName = ($filePathTemplate -f $time,$fileIdx,"jpg");
                                $fileAsImage.Save($newFileName, [System.Drawing.Imaging.ImageFormat]::Jpeg);
                                $fileAsImage.Dispose();
                                del $fileName;

                                $fileAsImage = New-Object -TypeName system.drawing.bitmap -ArgumentList $newFileName 
                                $fileName = $newFileName
                        }

                        if ($ShowProgress) { "Saving OCR Text..." }

                        $property = $fileAsImage.PropertyItems[0];
                        $property.Id = 40092;
                        $property.Type = 1;
                        $property.Value = [system.text.encoding]::Unicode.GetBytes($ocrText);
                        $property.Len = $property.Value.Count;
                        $fileAsImage.SetPropertyItem($property);
                        $fileAsImage.Save(($fileName + ".new"));
                        $fileAsImage.Dispose();
                        del $fileName;
                        ren ($fileName + ".new") $fileName
                }
        }
        else {
                $modiDocument.Close();
                clear-variable modiDocument
        }

        if ($ShowProgress) { "Done." }

        if ($OpenCompletedResult) {
                . $fileName;
        }
        else {
                $result = dir $fileName;
                $result | add-member -membertype noteproperty -name OCRText -value $ocrText
                $result
        }
}

I ran into a few issues:

• MODI doesn't seem to be in the Office 2010 Technical Preview I installed first. Installing Office 2007 fixed that.
• The MODI.Document class, at least via PowerShell, can't be instantiated in a 64bit environment. To run the script on my 64bit OS I had to start powershell from the 32bit cmd.exe (C:\windows\syswow64\cmd.exe).
• I was planning to hook up my script to the scanner's 'Scan' button, but HP didn't get the button working for their Vista driver. Their workaround is "don't do that!".
• You must call Image.Dispose() to get .NET to release its reference to the corresponding image file.
• In trying to figure out how to store the text in the files comment, I ran into a dead-end trying to find the corresponding setter for GetDetailsOf which folks like James O'Neil use in PowerShell for interesting ends.

Mostly Moved Into New House

The weekend before the previous, Sarah and I moved our belongings into the new house and spent a lot of time packing and unpacking, and now we're officially living there (interested Facebook friends can find my new address or just ask me). The Saturday of the previous weekend Sarah's family came over for a half house warming and half Sarah's birthday celebration which was fun and served to force us to do more unpacking and forced me to take trips to Home Depot, Bed Bath and Beyond, etc. On Sunday, Sarah and I went out to her favorite restaurant and she opened her gifts that I had to hide to keep her from opening before her birthday. Happy Birthday Sarah!

While at Home Depot I had trouble finding what I was actually looking for, but I did find everything I needed to terminate the Cat5e cables that are wired in the house. Each room has a wall plate with two RJ45 sockets, both sockets wired to Cat5e cable. One of the cables per plate was already hooked up to a standard phone service punchdown board and the other cables per plate were all hanging unterminated next to the punchdown board. So now I've terminated them all with RJ45 connectors and hooked them up to my hub, wireless router, cable modem, etc. I had the same sort of fun setting all that up as I did playing with model train sets as a child. Hopefully no therapy will be required to figure out why that is.

A Brief History of Microsoft's Live Search's New Domain Bing

• 2003 July: The first archived version of bing.com features "bing! is a small device (e.g., possibly even a small Band-Aid(R)-like sticker!) that vibrates when a person's cell phone rings." I can't recall 2003 cell phones, were they big enough to require this device?
• 2004 August: Site for the same device is rewritten and looks much better, IMHO.
• 2006 June: The domain is now parked by easyDNS. I guess the "bing!" device didn't work out?
• 2006 November: Its now "BING*" and they won't say what they're working on ("we're still in stealth mode") but they are hiring C#/.NET developers.
• 2007 January: And they're gone. Without even exiting stealth mode. Too bad, I liked their logo. Their domain is now for sale...
• 2007 February: Looks like EasyMail buys the domain and offers a physical mailing service in Australia: "By simply clicking a button on your computer, mail is beamed electronically to a bing post office. Your mail is automatically printed, folded, enveloped and dispatched into the Australia Post network the very same day."
• Present: Now its the new home for Live Search of course.

The new name reminds me of the show Friends. Also, I hope they get a new favicon - I don't enjoy the stretched 'b' nor its color scheme.