I signed up for the pre-release beta and purchased a Chumby last year. Chumby looks like a cousin to a GPS
unit. Its similar in size with a touch screen, but has WiFi, accelerometers, and is pillow like on the sides that aren't a screen. In practice its like an Internet alarm clock that shows you photos
and videos off the Web. Its hackable in that Chumby Industries tells you about the various ways to run your own stuff on the Chumby, modifying the boot sequence (it runs Linux), turning on sshd,
etc, etc. The Chumby forum too has lots of info from folks who have found interesting hacks for the device.
When you turn on the Chumby it downloads and runs the latest version of the Chumby software which lets you set alarms, play music, and display Flash widgets. The Chumby website lets anyone upload their own Flash widgets to share with the community. I tried my hand at creating one using Adobe's free Flash creation SDK but I don't know Flash and didn't have the patience to learn.
Currently my Chumby is set to wake me up at 8am on weekdays with music from ShoutCast and then displays traffic and weather. At 10am everyday it switches to showing me a slide-show of LolCats. At 11pm it switches to night mode where it displays the time in dark grey text on a black background at a reduced light level so as not to disturb me while I sleep.
I like the Chumby but I have two complaints. The first is that it forces me to learn flash in order to create anything cool rather than having a built-in Web browser or depending on a more Web friendly technology. The second complaint is about its name. At first I thought the name was stupid in a kind of silly way, but now that I'm used to the name it sounds vaguely dirty.
I got a FlickrMail from Emma J. Williams a bit ago saying that they wanted to
use two of my photos in their Schmap San Francisco Guide online travel guide. So now you can see two of my vacation photos on the Westfield San Francisco Shopping Center Schmap page and the Hotel Diva Schmap page.
I think its wonderful that digital cameras are at
the point where I really don't have to know much about their workings to produce a photo that's reasonable looking. And its thanks to Flickr and searchable tags that Schmap could find my photos.
Since my photos on Flickr are all licensed under a Creative Commons license named Attribution-Noncommercial-No Derivative Works
2.0 Generic which only applies to non-commercial uses, Schmap, which is advertisement supported, kindly asked me if they could use my photos. I agreed to their license which was human readable
and included wonderful stuff like I get in place attribution and the license is only applicable while Schmap makes their guide freely available online.
Previously I've only heard of folks having their flickr photos used without their permission so I'm glad to know that's not always the case. Or perhaps this is just Schmap's clever method of getting me to blog about them.
![[Many books in large bookcase. Photo creator http://flickr.com/people/babblingdweeb/]](http://farm1.static.flickr.com/18/23816128_d4acb70b2d_m_d.jpg)
I use my recently added
books feed from LibraryThing, a site I've mentioned before where you track, review, recommend, and share your books, and I put the recently added
books on my page. I thought it might be nice to include the book covers so I suggested adding book covers to RSS feeds in
LibraryThings 'Recommend Site Improvements' group. The next day I had a response from the founder and lead developer Tim Spalding who
had started implementing the feature. I noticed a few bugs, reported them on the same thread, and he fixed them soon after. Fantastic! It makes me want to upgrade to a paying account.
Incidentally, if you notice the Ghost in the Shell book appear multiple times in my RSS feed its due to the previously mentioned iterative bug fixes. The same item appeared multiple times slightly differently with each bug fix and your RSS aggregator may have picked them up as distinct items.
I saw this odd looking cute cat and it reminded me of Thom Yorke. On a related note also see the myth buster lol-cat.
Also I think the whistling puppy (~0:05) and hungry lumas transforming on Super Mario Galaxy (~0:15) sound very similar.
This past weekend Sarah and I went to
Laughs Comedy Spot in Kirkland and saw Doug Benson who frequently appears on VH1's Best Week Ever. Doug Benson seemed drunk or high and messed up a couple of jokes but otherwise was at times very funny. There were
three comedians on before him sorted from least humorous to most. The place was smaller than I thought it'd be and required a lot of work to flag down a waitress to obtain a drink.
We started at Home Depot because I didn't know better. The screws are all listed in metric sizes which is apparently uncommon and a helpful senior worker forwarded us to McLendons whose stock was better but we were again redirected this time to Tacoma Screw Products.
Tacoma Screw Products is great! See them for your hardware needs first! The store has a back area with every kind of screw ever. I felt a little out of place as as all the customers looked like contractors. The employee who helped me explained the various options I had in screws as the bike instructions weren't as explicit as they could have been. In the end I bought all my screws for only one dollar (much better than $30!) and they all fit correctly.
IPv6 address syntax consists of 8 groupings of colon delimited 16-bit hex values making up the 128-bit address. An optional double colon
can replace any consecutive sequence of 0 valued hex values. For example the following is a valid IPv6 address: fe80::2c02:db79
Some IPv6 addresses aren't global and in those cases need a scope ID to describe their context. These get a '%' followed by the scope ID.
For example the previous example with a scope ID of '8' would be: fe80::2c02:db79%8
IPv6 addresses in URIs may appear in the host section of a URI as long as they're enclosed by square brackets. For example:
http://[fe80::2c02:db79]/. The RFC explicitly notes that there isn't a way to add a scope ID to the IPv6 address in a URI. However a draft document describes adding
scope IDs to IPv6 addresses in URIs. The draft document uses the IPvFuture production from the URI RFC with a 'v1' to add a new
hostname syntax and a '+' instead of a '%' for delimiting the scope id. For example: http://[v1.fe80::2c02:db79+8]/. However, this is still a draft document, not a final
standard, and I don't know of any system that works this way.
In Windows XPSP2 the IPv6 stack is available but disabled by default. To enable the IPv6 stack, at a command prompt run 'netsh interface ipv6 install'. In Vista IPv6 is the on by default and cannot be turned off, while the IPv4 stack is optional and may be turned off by a command similar to the previous.
Once you have IPv6 on in your OS you can turn on IPv6 for IIS6 or just use IIS7. The address ::1 refers to the local machine.
In some places in Windows like UNC paths, IPv6 addresses aren't allowed. In those cases you can use a Vista DNS IPv6 hack that lives in the OS
name resolution stack that transforms particularly crafted names into IPv6 addresses. Take your IPv6 address, replace the ':'s with '-'s and the '%' with an 's' and then append '.ipv6-literal.net'
to the end. For example: fe80--2c02-db79s8.ipv6-literal.net. That name will resolve to the same example I've been using in Vista. This transformation occurs inside the system's local
name resolution stack so no DNS servers are involved, although Microsoft does own the ipv6-literal.net domain name.
MSDN describes IPv6 addresses in URIs in Windows and I've described IPv6 addresses in URIs in IE7. File URIs in
IE7 don't support IPv6 addresses. If you want to put a scope ID in a URI in IE7 you use a '%25' to delimit the scope ID and due to a bug you must have at least two digits in your scope ID. So,
to take the previous example: http://[fe80::2c02:db79%2508]/. Note that its 08 rather than just 8.
Two and half weeks ago Sarah and I went to Las Vegas where I got to
see Jesse, Pat, Chris, and (briefly because he's some kind of big shot too busy for his friends now etc) Grib from college. They're mostly in San Jose and I hadn't seen them for a while so it was a
lot of fun to hang out. We all stayed at the MGM which is a nice hotel with some good restaurants. In other Vegas related links, Sarah added Sarah's Las Vegas restaurant reviews to her reviews and Jesse has Jesse's Vegas
photos up too.
Sarah and I saw the Blue Man Group (video from a concert) and the Price is Right Live Show. The Blue Man Group
was very cool although the music was all rock with a heavy drum focus (not depicted in the videos I linked) which I got a little tired of. But despite that I really enjoyed the show, very funny and
I totally recommend it. The Price is Right Live Show is like the regular show on TV except the recording is not televised and its not hosted by Bob Barker or Drew Carey. So folks from the audience
are still called up to play the same games and really win prizes. It was advertised as hosted by Todd Newton, B-list game show host, but was instead
hosted by JD Roberto who hosted such things as "Reality Remix" and the show "Are You Hot? The Search for America's Sexiest People". The showcase
showdown included the 2008 version of my car and thankfully I wasn't picked to compete for that because, well I don't know where they bought the car, but I would have gotten the price very wrong.
We sat right next to the stage for that show and had a good time.
For New Years Eve Sarah and I stayed in and watched the glitched Seattle Space Needle fireworks show from a safe distance. On New Years we went to a pot-luck at Todd's house and had a fun time. Todd's place
is on the top of a hill and has a lovely view of Washington's snow-capped mountains.
Silver Surfer and 
Happy Hipo but in general
changing the colors this way doesn't produce something pretty.
The new Zune software has podcast support which does everything I'd want to do with a
Win MCE recorded TV series so the goal is to shoehorn a TV series into a Zune podcast. An overview of the steps: Create an XSLT that converts Win MCE data to a podcast, run the XSLT as a scheduled
task every few hours per TV series, setup a Web server pointed at the resulting podcasts and the Win MCE Recorded TV directory, and subscribe to the resulting podcasts in the Zune software.
C:\windows\system32\wscript.exe C:\users\dave\bin\xsltproc.js C:\Users\Dave\Documents\trunk\development\mce-zune\mce-to-podcast.xslt
C:\ProgramData\Microsoft\eHome\Recording\Recordings.xml --param title "The Daily Show With Jon Stewart" --param max 4 --param baseURI "http://groucho/" --param thisRelURI "tds.xml" -o
"D:\recorded tv\tds.xml"
Some rights reserved
